Section 5. Custom Background Image File Format; Section 6. Custom Message Api In The Skeleton Mode - Sony PCS-TL33 System Integration Manual

Direction of file transfer by ftp
telnet xxx.xxx.xxx.xxx
login: sonypcs
Password: (administrator password, or blank if no password is set)
pcsdb> cd IMAGE
pcsdb> del WPCUSTOM.JPG
*Please reboot the system.
Note: Please do not execute any other file management other than
described on this manual

Section 5. Custom background image file format

The custom background image file name must be "WPCUSTOM.JPG". The file size
has to be "1280 x 768", and should be JPEG file format. If the image size is larger,
the image size will be reduced. If the file size is larger, it takes longer time to reboot.
The recommended file size is under 300K Bytes.

Section 6. Custom message API in the Skeleton mode

Please use the command by TELNET.
1. Connect TELNET to the PCS-TL33/TL30, and input "cntr" to start external
control mode.
2. Input "smes /desired character strings to
to show custom message.
POSITION 0:upper position, 1:middle position, 2:lower position
DURATION 0:eternally, n:n seconds, -1:turn off the message
Example) show "12345abc" at lower position for 5 seconds.
telnet xxx.xxx.xxx.xxx
login: sonypcs
password: (administrator password or blank)
pcsdb> cntr
ok
smes /12345abc/2/5/
(note: if the last "/" is missing, the message is displayed eternally)
(PCS-TL33/TL30's IP address)
(PCS-TL33/TL30's IP address)
6
TL33 KIOSK Mode Manual_E_071023.pdf
display/POSITION/DURATION/"