TABLE OF CONTENTS WARNING AND SAFETY INFORMATION ------------------ PRODUCT SPECIFICATIONS ------------------------------ INCLUDED COMPONENTS -------------------------------- UNDERSTANDING YOUR POWER STATION -------------- UNDERSTANDING THE LCD DISPLAY -------------------- RECHARGING THE POWER STATION -------------------- USING THE POWER STATION ---------------------------- CLEANING INSTRUCTIONS ------------------------------- TROUBLESHOOTING ------------------------------------- WARRANTY & SUPPORT INFORMATION -----------------...
WARNING AND SAFETY INFORMATION • Read the user manual carefully before using the product. • DO NOT use the product near a heat source, such as a fire source or a heating furnace. • Avoid contact with liquids of any kind. DO NOT operate or expose the product to rain or any wet/high moisture environment where the product may be exposed to any form of water.
PRODUCT SPECIFICATIONS Battery Capacity 2048Wh /51.2V 40Ah LiFePO4 Cell Type 2400W continuous AC Output 100W Max 1 x USB C PD Output 20W Max 3 x USB C PD Output QC 3.0 18W Max 2 x USB A Output 12V /10A Cigarette Lighter Output 12V / 3A 2 x DC 5521 Output...
INCLUDED COMPONENTS XT90 TO MC4 CABLE AC POWER CABLE POWER STATION XT60 TO ANDERSON CABLE XT90 TO CARRY BAG ANDERSON CABLE XT90 TO CIGARETTE LIGHTER CABLE...
UNDERSTANDING YOUR POWER STATION 1. LED Light 2. LCD Display 3. 12V Cigarette Lighter Output 4. XT 60 DC 12V/25A Output 5. USB C PD 100W x 1, USB C PD 20W x 3 and USB A QC 3.0 x 2 Outputs 6.
Page 7
10. On and Off power button 11. LED light On and Off control button 12. USB Output control button 13. DC Output control button 14. AC Output control button...
UNDERSTANDING THE LCD DISPLAY 1. Time to full 11. AC output 2. Time to empty 12. XT 60 DC output 3. High and low temperature protection 13. LED light 4. AC input 14. Output power status 5. XT 90 solar input 15.
RECHARGING THE POWER STATION The Kick Charge 2400 Power Station contains a 2048Wh LiFePO4 battery pack. There are two ways that the battery can be charged. Charging by 240V AC power cable (INCLUDED): Average charge time 2.5 hours Charging by solar panels (NOT INCLUDED) through the XT90 input port: average charge time 4 hours on...
USING THE POWER STATION The power station consists of multiple outputs that can be used at the same time. Turning on • Turn on the power station by holding the power button for three seconds. Using outputs • To use AC output, short press the AC control button to activate •...
Page 11
Cooling Fan • The power station utilises an internal cooling fan to maintain appropriate operating temperature. • When experiencing a higher output load, the fan automatically activates. • During discharge and charge process, the fan will operate intermittently to regulate the internal temperature. •...
CLEANING INSTRUCTIONS • Ensure the power station is disconnected from the mains before cleaning. • DO NOT use sharp or hard objects to clean as they damage the surface of the product. • DO NOT use alcohol-based cleaning materials to clean the power station. •...
WARRANTY & SUPPORT INFORMATION Need help? For product support or to make a warranty claim, reach out to the KickAss Customer Service team on (07) 3123 4715 or at support@kickassproducts.com.au. Alternatively, visit our Customer Support Portal at: https://supportportal.kickassproducts.com.au/...
Page 14
KickAss is a registered trademark of KickAss Products Pty Ltd. Designed & imported by KickAss Products Pty Ltd 39 Iris Place, Acacia Ridge, QLD 4110 Australia Made in China...
Need help?
Do you have a question about the KAPHUB-2000 and is the answer not in the manual?
Questions and answers