Related Manuals for Galaxy Equipment 177CF5
Summary of Contents for Galaxy Equipment 177CF5
- Page 1 User Manual Commercial Chest Freezer User Manual 03/2025 177CF5, 177CF7, 177CF10HC, 177CF13HC, 177CF16HC, 177CF20HC, 177CF25HC, 177CF30HC Read the manual thoroughly prior to equipment setup, operation, and maintenance. - 1 -...
- Page 2 User Manual Warnings DANGER – RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED. TO BE REPAIRED ONLY BY TRAINED SERVICE PERSONNEL. DO NOT PUNCTURE REFRIGERANT TUBING. PELIGRO – RIESGO DE INCENDIO O EXPLOSION. REFRIGERANTE INFLAMABLE UTILIZADO. PARA SER REPARADO SOLAMENTE POR PERSONAL DE SERVICIO CALIFICADO.
-
Page 3: Installation
User Manual Installation Important! Please Read Before Installation: • This unit is intended for use in a temperature-controlled environment less than 75°F and 60% relative humidity. • If the unit has recently been transported on its side, please let the unit stand upright for a minimum of 24 hours before plugging it in. -
Page 4: Temperature Control
User Manual Electrical • Please ensure that the required voltage of the compressor is being supplied at all times. Low or high voltage can detrimentally affect the refrigeration unit. • All units should be plugged into a grounded and properly sized electrical outlet with appropriate overcurrent protection. -
Page 5: Regular Maintenance
User Manual Regular Maintenance Care and Cleaning The freezer should be cleaned periodically. Generally, it should be cleaned every 30-45 days. Unplug before cleaning, and use a soft cloth with a solution of warm water and mild soap to scrub inside and outside of the cabinet. -
Page 6: Troubleshooting
User Manual Troubleshooting Compressor Not Running Fuse blown or circuit breaker tripped. Replace fuse or reset circuit breaker. Power cord unplugged. Plug in power cord. Thermostat set too warm. Set thermostat to a higher setting. Condensing Units Run For Long Periods of Time Excessive amount of warm product placed in cabinet.
Need help?
Do you have a question about the 177CF5 and is the answer not in the manual?
Questions and answers