Section 2 Getting Started; Loading The Battery; Inserting And Removing An Sd Card (Optional) - Toshiba PA3790U-1CAM User Manual

Loading the Battery

Before using the camcorder, users must load the Lithium-
ion rechargeable battery come within the package.
1. Slide the safety latch to the unlocked position and open
the battery cover.
2. Insert the battery according to the correct polarity marks
( + or -).
3. Close the battery cover firmly, and slide the safety latch
to the locked position.
Note
Please remove the insulator on battery connection before use.

Inserting and Removing an SD Card (Optional)

The camcorder comes with an internal memory which
allows you to store pictures and movies. You can expand the
memory capacity by using an optional SD/SDHC memory
card.
1. Insert the memory card into the slot. Please refer to the
figure on the right side.
2. To remove an installed SD card, press the card inwards
to release it.
3. When the card pops out, gently remove it from its slot.
4. Recommended memory capacity: 1GB and above.
Note
• When a memory card is fitted, movies/pictures are saved on the card rather than on the built-in
memory.
• Protecting Data on an SD Card: SD Card is read-
only when it is locked. No pictures or movies can be
recorded when the SD card is locked. Make sure the
lock is on the writeable position before recording any
media.
Getting Started
10
Section 2
Writeable Write-Protected
position Position
EN