Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual page 79

1 Touch sensor menu (page 69)
#: Set the shutter button
touch sensor to ON.
$: Set the shutter button
touch sensor to OFF.
2 Resolution menu/video size
menu (page 70)
<Single-shot/sequential shots
mode>
k: Shoot at 3648 × 2736 pixels
(single-shot mode only)
N: Shoot at 3648 × 2056 pixels
(16:9 aspect ratio)
D: Shoot at 2816 × 2112 pixels
z: Shoot at 2288 × 1712 pixels
t: Shoot at 1600 × 1200 pixels
[: Shoot at 640 × 480 pixels
<Video clip recording mode>
d: Shoot at 640 × 480 pixels
5: Shoot at 320 × 240 pixels
<: Make an audio recording
(page 71)
3 Compression rate menu
(single-shot/sequential shots
mode only) (page 73)
j: For shooting at low
compression
0: For shooting at normal
(moderate) compression
4 Focus mode menu (page 74)
B: 9-point focus mode
C: Spot focus mode
p: The focus follows the
focus-locked subject.
i When you specify multiple functions that cannot be simultaneously
enabled, the function which was last set becomes the active setting, and
the other settings accordingly change automatically.
5 Light-measuring mode menu
(page 76)
X: Multi-section light-
measuring
W: Center-weighted light-
measuring
Y: Spot light-measuring
6 ISO sensitivity menu
(page 77)
t
: Sets the ISO sensitivity
automatically (ISO50 to
200).
*: ISO50
u: ISO100
v: ISO200
w: ISO400
6: ISO800
-: ISO1600
S: ISO2500
7 White balance menu (page 79)
>: The camera will determine
the setting automatically.
r: For photography in fair
weather (sunny) conditions
o: In overcast conditions
p: Under fluorescent lighting
q: Under incandescent
lighting
^: For setting the most
accurate white balance
8 Exposure correction menu
(page 80)
h Change the brightness of the
image.
9 Date imprint menu (page 81)
h Imprint the capture date on still
images.
68
English