1. Manuals
  2. Brands
  3. Aim Manuals
  4. Carrier boards
  5. AVC-2
  6. Hardware manual

Aim AVC-2 Hardware Manual

Air cooled, conduction cooled aim vme - carrier with 2 pmc slots
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AVC-2/AVC-2-CC
Air Cooled
Conduction Cooled
AIM VME - Carrier
With 2 PMC Slots
Hardware
Manual
V01.20 Rev. A
July 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVC-2 and is the answer not in the manual?

Questions and answers

Related Manuals for Aim AVC-2

Summary of Contents for Aim AVC-2

  • Page 1 AVC-2/AVC-2-CC Air Cooled Conduction Cooled AIM VME - Carrier With 2 PMC Slots Hardware Manual V01.20 Rev. A July 2017...
  • Page 3 AVC-2/ AVC-2-CC AIM-VME-Carrier board With 2 PMC Slots Hardware Manual V01.20 Rev. A July 2017 AIM No. 60-18310-16-0120-A AVC-2 Hardware Manual...
  • Page 4 Notice: The information that is provided in this document is believed to be accurate. No responsibility is assumed by AIM GmbH for its use. No license or rights are granted by implication in connection therewith. Specifications are subject to change without notice.

  • Page 5: Document History

    Interrupt-Mapping LINT[0-5] added V01.01 B 10.09.2003 J. Furgerson Applied new AIM Formatting V01.01 C 08.02.2005 F. Schmid Small layout corrections AIM Doc. Number inserted / New USA address V01.01 D 13.03.2008 M. Mutter Changed Operating Temperatures V01.01 E 04.05.2011 M. Schüssele Cosmetic Changes (Layout) (F.
  • Page 6 THIS PAGE IS INTENTIONALLY LEFT BLANK AVC-2 Hardware Manual...

  • Page 7: Table Of Contents

    Preparation and Precaution for Installation ................3 Installing the PMC Modules on the AVC-2 ................3 2.2.1 To install the PMC Module on the air cooled AVC-2 ............4 2.2.2 To install the PMC Module on the conduction cooled AVC-2-CC ........5 2.2.3...
  • Page 8 Table Title Page Figure 2-1 PMC Carrier Board Installation on the Air Cooled AVC-2 ....... 4 Figure 2-2 PMC Carrier Board Installation on the Conduction Cooled AVC-2 ....5 Figure 2-3 DIP switch position example ................6 Figure 2-4 AVC-2 Front Views ..................7 Figure 3-1 AVC-2 Board Connectors ................

  • Page 9: Introduction

    The AVC-2 is a single slot, double height (6U) VMEbus module. It includes two separate PMC slots. As VME to PCI Bridge the Universe II Tundra chip is used. The AVC-2 fulfils the requirements of the VME64x extension as well as the Interface for Rear I/O. The PMC-slots are in conformance with the Draft Standard Physical and Environmental Layers for PCI Mezzanine Cards: PMC (P1386.1/Draft 2.4).

  • Page 10: Applicable Documents

    Draft Standard for PMC Draft 2.0, April 4 , 1995 American National Standard for Conduction Cooled PMC ANSI/VITA 20-2001 (R2005) IEEE Standard for Mechanical Core Specifications for Conduction-Cooled Eurocards IEEE Std 1101.2-1992(2001) Universe II User Manual; Tundra Semiconductors; Spring 1998 AVC-2 Hardware Manual...

  • Page 11: Installation

    Otherwise damage to the device or system may occur. 2.2 Installing the PMC Modules on the AVC-2 Depending, if air cooled or conduction cooled variant of the AVC-2 carrier board is used, different install instruction must be considered. AVC-2 Hardware Manual...

  • Page 12: To Install The Pmc Module On The Air Cooled Avc-2

    Take care not to damage or bend connector pins. Secure the board. Connect the system with power source and turn on the power to your system. Figure 2-1 PMC Carrier Board Installation on the Air Cooled AVC-2 AVC-2 Hardware Manual...

  • Page 13: To Install The Pmc Module On The Conduction Cooled Avc-2-Cc

    Secure the board and tighten the wedgelocks with the screw close behind the ejectors. Connect the system with power source and turn on the power to your system. Ejector Wedgelock Ejector Wedgelock Figure 2-2 PMC Carrier Board Installation on the Conduction Cooled AVC-2 AVC-2 Hardware Manual...

  • Page 14: Base Address Configuration

    To get access to the 4Kbyte register space of the VME-PCI-bridge the user has to select the base address with the DIP switch located between the VME-connectors on the AVC-2 board. The registers are mapped into the A16 address space. By default, the base address is set to 0xF000.

  • Page 15: Frontpanel

    Table 2-2 Frontpanel LEDs 2.3.2 Frontpanel View Right side of figure below shows the front panel of the air cooled AVC-2 carrier board with two separate PMC modules connected as it could be mounted in your chassis. Left side of figure below shows the front view of the conduction cooled AVC-2 carrier board with the wedgelocks and ejectors.
  • Page 16 THIS PAGE INTENTIONALLY LEFT BLANK AVC-2 Hardware Manual...

  • Page 17: Connector Pin Assignments

    3. CONNECTOR PIN ASSIGNMENTS 3 CONNECTOR PIN ASSIGNMENTS Figure 3-1 shows the VME (P0-P2) and PMC (P11-P24) connectors on the AVC-2 board. These connectors are defined in the following two sections. PMC 1 PMC 2 Figure 3-1 AVC-2 Board Connectors...

  • Page 18: Vme Connectors

    3.1 VME Connectors On the AVC-2 board the VME64x extended Connectors are used. The VME64x Connectors are designed to be backwards compatible to VME and VME64. 3.1.1 VME64x Connector P0 If this connector is assembled, the carrier board is in conformance with the VME64x Specification Documents.

  • Page 19: Vme Connectors P1 And P2

    VME+3V V_AM4 VAD15 VAD7 IRQ7 VAD14 VME+3V VAD6 IRQ6 VAD13 VAD5 IRQ5 VAD12 VME+3V VAD4 IRQ4 VAD11 VAD3 IRQ3 VAD10 VME+3V VAD2 IRQ2 VAD9 VAD1 IRQ1 VAD8 VME+3V -12V +12V Table 3-2 P1 VME Connector Pin Assignment AVC-2 Hardware Manual...

  • Page 20: Table 3-3 P2 Vme Connector Pin Assignment

    P24_44 P24_43 P24_46 VD24 P24_45 P24_48 VD25 P24_47 P24_50 VD26 P24_49 P24_52 VD27 P24_51 P24_54 VD28 P24_53 P24_56 VD29 P24_55 P24_58 VD30 P24_57 P24_60 VD31 P24_59 P24_62 P24_61 P24_64 P24_63 Table 3-3 P2 VME Connector Pin Assignment AVC-2 Hardware Manual...

  • Page 21: Pmc Connectors

    3. CONNECTOR PIN ASSIGNMENTS 3.2 PMC Connectors The AVC-2 is a VME carrier board with two PMC slots. Each PMC slot consists of 4 PMC connectors. A PMC connector includes 64 pins divided into 2 rows with alternating pin count. Connector Px1 and Px2 include the general signals for 32 bit PCIbus. The connector Px3 includes the signals for 64 bit PCI extension, and the connector Px4 is for use of Rear I/O.

  • Page 22: Table 3-5 Pmc Connector Px2

    TRDY# +3.3V STOP# STOP# PERR# PERR# +3.3V SERR# +3.3V SERR# CBE1# CBE1# PCIAD14 PCIAD13 PCIAD14 PCIAD13 M66EN PCIAD10 M66EN PCIAD10 PCIAD8 +3.3V PCIAD8 +3.3V PCIAD7 PCIAD7 +3.3V +3.3V ACK64# +3.3V ACK64# +3.3V Table 3-5 PMC Connector Px2 AVC-2 Hardware Manual...

  • Page 23: Table 3-6 Pmc Connector Px3

    PCIAD47 PCIAD46 PCIAD47 PCIAD46 PCIAD45 PCIAD45 PCIAD44 PCIAD44 PCIAD43 PCIAD42 PCIAD43 PCIAD42 PCIAD41 PCIAD41 PCIAD40 PCIAD40 PCIAD39 PCIAD38 PCIAD39 PCIAD38 PCIAD37 PCIAD37 PCIAD36 PCIAD36 PCIAD35 PCIAD34 PCIAD35 PCIAD34 PCIAD33 PCIAD33 PCIAD32 PCIAD32 Table 3-6 PMC Connector Px3 AVC-2 Hardware Manual...

  • Page 24: Table 3-7 Pmc Connector Px4

    P14_49 P14_50 P24_49 P24_50 P14_51 P14_52 P24_51 P24_52 P14_53 P14_54 P24_53 P24_54 P14_55 P14_56 P24_55 P24_56 P14_57 P14_58 P24_57 P24_58 P14_59 P14_60 P24_59 P24_60 P14_61 P14_62 P24_61 P24_62 P14_63 P14_64 P24_63 P24_64 Table 3-7 PMC Connector Px4 AVC-2 Hardware Manual...

  • Page 25: Structure Of The Avc-2

    4. STRUCTURE OF THE AVC-2 4 STRUCTURE OF THE AVC-2 The structure of the AVC-2 carrier board is shown in block diagram below. BIU 1 Interface Specific I/O BIU 2 Interface Specific I/O PMC Slot 2 PMC Slot 1 PCI-Bus (64bit)

  • Page 26: Vme To Pci Bridge

    The PMC rear I/O connectors of PMC slot 1 and slot 2 must be assembled on both the carrier board and the PCI-Mezzanine Card The rear I/O signals must be enabled on the PMC module by assembling the rear-IO-resistors. AVC-2 Hardware Manual...

  • Page 27: Interrupt Mapping

    4. STRUCTURE OF THE AVC-2 4.4 Interrupt Mapping There are 6 Interrupt Lines provided to the VME user. The Interrupt inputs are mapped as defined in Table 4-1. VME Interrupt Associated PMC Interrupt Line VME-LINT0 : PMC-1 INTA VME-LINT1 :...
  • Page 28 THIS PAGE INTENTIONALLY LEFT BLANK AVC-2 Hardware Manual...

  • Page 29: Technical Data

    Front panel for indicating assertion of the SYSFAIL line, the VMEbus activity, the PCIbus activity and PCIbus errors. Dimensions: Double Height (6U) Board (233,35mm x 160mm), Single-Width (19,2mm) Supply Voltage: Standard - Supply 5.0V +/- 5%, +/-12 Volt +/- 5% AVC-2 Hardware Manual...
  • Page 30 Power (typical): +5V : 2.0 Watts (+/- 12V are not in use on AVC-2) Available power on +3.3V: 18 Watt Weight: Air Cooled AVC-2: appr. 290g Conduction Cooled AVC-2: appr. 640g Temperature: +70°C. Standard Operating +85°C Extended Temperature +85°C Storage...

  • Page 31: Notes

    Single Inline Memory Module SRAM Static Random Access Memory SSRAM Synchronous Static Random Access Memory Time Code Processor UART Universal Asynchronous Receiver and Transmitter VITA VMEbus International Trade Association VERSAmodule Eurocard VME64 VME 64bit extension VME64x VME 64bit extension AVC-2 Hardware Manual...
  • Page 32 THIS PAGE INTENTIONALLY LEFT BLANK AVC-2 Hardware Manual...

  • Page 33: Apendix

    All operating Data for handling the I/O Protocol will be stored in volatile memory only. No Transfer data is stored in Non-Volatile Memory. The Non-Volatile Memory only contains production relevant data for board personalisation, FPGA Logic or Firmware Code for the on board Microcontroller. AVC-2 Hardware Manual...

This manual is also suitable for:

Avc-2-cc

Table of Contents