Table of Contents
Advertisement
Quick Links
Automatic pet water fountain with wireless pump
(for dogs and cats)
PET-WD02BK-G/PET-WD02WH-G
Thank you very much for purchasing this product.
Please read this manual before use.
The manual describes the precautions and how to use the product safely.
After reading, keep the manual in a safe location for future reference.
* In this manual, PET-WD02BK-G/PET-WD02WH-G will be referred to as
"the Product" except in some places.
Compliant model: PWD02
English (ENUS)
For indoor and residential use
Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elecom SILENT AQUA PET-WD02BK-G
Summary of Contents for Elecom SILENT AQUA PET-WD02BK-G
- Page 1 English (ENUS) Automatic pet water fountain with wireless pump (for dogs and cats) PET-WD02BK-G/PET-WD02WH-G For indoor and residential use Manual Thank you very much for purchasing this product. Please read this manual before use. The manual describes the precautions and how to use the product safely. After reading, keep the manual in a safe location for future reference.
-
Page 2: Table Of Contents
Package contents Before use, check that the items below are all supplied in the product’s package. Although every effort has been made to ensure proper packaging, contact the retailer where this product was purchased if any shortage or breakage is discovered. ... -
Page 3: Safety Precautions
Safety precautions This section describes the precautions to take to prevent hurting yourself and others or damaging property. Read them carefully before using the product. The extent of possible harm and damage caused when the product is used without regard to the precautions is categorized below. - Page 4 Safety precautions (continued) WARNING Do not allow the power supply base, plug, AC adapter (commercially available), USB port, dedicated USB power cable, and outlet to get wet. Doing so may cause a fire or electric shock. Regularly clean the outlet, plug prongs, and surface with the prongs mounted. Failure to do so may cause a fire.
- Page 5 Safety precautions (continued) CAUTION Do not put the product near or on an electric appliance. Doing so may cause water to spill on the electric appliance, resulting in a malfunction. On the power supply base, do not put any other object than the water tank of the product. Doing so may cause a fire, ignition, or electric shock.
-
Page 6: Names Of Components
Names of components Tray Filter Filter tray Tube Joint Wireless pump Water tank Power supply base Dedicated USB power cable Prepare an AC adapter (commercially available) separately. USB Type-C connector ® USB Type-A connector... -
Page 7: Before Use
Before use Before using the product for the first time after purchase or after a long period of non-use, wash the parts and assemble the unit correctly. Removing the parts Washing the tray, filter tray, water tank, wireless pump, joint, and tube Remove the parts from the water tank. -
Page 8: Washing The Filter
Before use (continued) Washing the filter • Prepare a tub large enough to shake and wash the filter. Pour an adequate amount of tap water into a tub and soak the filter in it for approximately 30 minutes. Shake and wash the filter under water. Repeat changing the water and shaking and washing the filter until fine particles of the activated carbon or yellow liquid from the... -
Page 9: How To Use
How to use Attaching the parts Attach the tube straight to the filter Set the wireless pump in such a way that it fits into the depression in the tray. water tank. • Make sure that it is inserted tightly without a gap. - Page 10 How to use (continued) Keeping the side with the protrusions facing upward, place the filter on the filter tray. Protrusion • Putting the filter with its back side facing up on the filter tray causes it to float, preventing it from filtering. Put the tray on the filter tray.
-
Page 11: Turning The Power On
How to use (continued) Turning the power on The LED light of the power supply Connect the dedicated USB power base lights green, indicating that the cable to an AC adapter (commercially power turns on. available). LED light USB Type-A connector AC adapter Dedicated USB... -
Page 12: Selecting A Mode To Set
How to use (continued) Selecting a mode to set You can set a mode with the mode switching button. Mode switching button Mode LED light Standard mode Water comes out continuously. Multi-color mode The LED light changes in various colors. Changes in various colors Light-off mode Use the mode to turn the LED light off, for example, during... -
Page 13: Cleaning And Storage
Cleaning and storage Cleaning the product • Before cleaning, be sure to disconnect the AC adapter (commercially available) from the outlet and remove the water tank from the power supply base. • Refer to “Before use - Removing the parts⇒p.6” for how to remove the parts. -
Page 14: Cleaning Brush
• If dirt is apparent or has discolored the filter, replace the filter before the planned replacement time. Remove the impeller by hooking it with the handle of the supplied cleaning • For replacement, use ELECOM’s brush. separately sold “replacement demineralization filter PET-WD02FT4” for SILENT... -
Page 15: Storing The Product
• Replace the pump with a new one approximately once a year. The impeller deteriorates over a long period of use, lowering the pump performance. • For replacement, use ELECOM’s separately sold “replacement pump • Also clean the inside of the water PET-WD02MT-G” for SILENT AQUA suction tube. -
Page 16: Troubleshooting
The cable is disconnected. Replace the cable with ELECOM’s separately sold “replacement power cable PET-WD02USB-G” for SILENT AQUA automatic pet water fountain with a wireless pump. - Page 17 (commercially available) to the outlet again. Repeat this several times until water comes out. The impeller is broken or worn. Replace the pump with a separately sold ELECOM’s “replacement pump PET-WD02MT-G” for SILENT AQUA automatic pet water fountain with a wireless pump.
-
Page 18: Error Notification
Error notification Watering errors are notified by a red LED light. Error LED light behavior • The water tank is misaligned with the power supply base. • The wireless pump is out of place in the water tank. Starts blinking red after approximately 10 •... -
Page 19: Frequently Asked Questions
Frequently asked questions Question Answer My pet is scared of the water Stop using the food bowl and waterer you are currently fountain and does not want using, and instead use the product on its own. Leave it to drink from it. What should I for a while and let your pet learn where to drink. -
Page 20: Specifications
Specifications Rated voltage 5 V⎓ Power consumption 0.8 W (maximum) Power source (AC adapter Input: 100 to 240 VAC, output: 5 VDC, 1 A (commercially available)) Maximum capacity Approximately 2 L (0.53 gal) Main unit and tray: ABS Material Filter: polypropylene, ion-exchange resin, and coconut shell activated carbon Approximately W177 ×... - Page 21 A customer who purchases outside Japan should contact the local retailer in the country of purchase for inquiries. Global Support In “ELECOM CO., LTD. (Japan)”, no customer support is available for inquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements will be made under stipulation of the Elecom warranty. ...
Need help?
Do you have a question about the SILENT AQUA PET-WD02BK-G and is the answer not in the manual?
Questions and answers