Panasonic AW-HE40 Technical Notes

Configuring ip cameras to work with viso

Hide thumbs Also See for AW-HE40:

Operating instruction (138 pages)

Installation & setup manual (12 pages)

Manual (4 pages)

page of 12

/ 12
Bookmarks

Quick Links

Download this manual

Technical Note

Configuring

Panasonic IP

cameras to work with

Viso®

Colofon

Introduction

The steps to install the cameras

Install the Easy IP Setup software and set the camera's IP address

Define camera settings - AW-HE40

Define camera settings - AW-HE130

Select the cameras in Viso

Select microphones

Need help?

Do you have a question about the AW-HE40 and is the answer not in the manual?

Questions and answers

Summary of Contents for Panasonic AW-HE40

Page 1 Viso® Colofon Introduction The steps to install the cameras Install the Easy IP Setup software and set the camera’s IP address Define camera settings - AW-HE40 Define camera settings - AW-HE130 Select the cameras in Viso Select microphones...
Page 2 Colofon Information in this document is subject to change without notice and does not represent a commitment on the part of Noldus Information Technology bv. The software described in this document is furnished under a license agreement. The software may be used or copied only in accordance with the terms of the agreement. Copyright ©...
Page 3 Introduction This Technical Note describes how to configure Panasonic cameras to work with Viso. The Panasonic cameras sold by Noldus do not support ONVIF. To record audio, connect a microphone to the Viso network or, alternatively, plug a microphone into the camera.
Page 4 We recommend to use a dedicated network for the entire Viso system with the cameras. procedure Install the Easy IP Setup software and set the camera’s IP address Define camera settings - AW-HE40 Define camera settings - AW-HE130 Select the cameras in Viso Select microphones...
Page 5 Install the Easy IP Setup software and set the camera’s IP address To set the IP address of the camera to the same range as computers in the Viso network. procedure 1. Install the Easy IP Setup software supplied together with the camera. 2.
Page 6: System Tab
Define camera settings - AW-HE40 To configure the camera for optimal recording with Viso. procedure 1. Open the camera in a browser by typing the IP address in the address field of an Internet browser. Username: admin Password: 12345 2. When you are prompted to change the username and password, then do so. ...
Page 7 IMPORTANT Logout from the camera in the browser before you start recording.
Page 8 Define camera settings - AW-HE130 To configure the camera for optimal recording with Viso. procedure 1. Open the camera in a browser by typing the IP address in the address field of an Internet browser. Then enter the username and password and click OK: Username: admin Password: 12345 2.
Page 9 System tab Install Position: Hanging Smart Picture Flip: Auto MPORTANT Logout from the camera in the browser before you start recording.
Page 10 Select the cameras in Viso To select the Panasonic cameras in Viso Viewer. prerequisites Your user role allows location setup (Technician). You added a location. See locations. You installed your cameras. procedure 1. Open the Locations tab and click Edit Locations.
Page 11 Select microphones To select microphones in Viso Viewer. prerequisites Your user role allows location setup (Technician). You added a location. See locations. You selected the cameras. procedure 1. In the Add location window, click the pencil button next to the Audio device column. 2.
Page 12 Optionally, adjust the playback volume of the Viso Viewer computers. To do so, click on the speaker icon in the bottom-right corner of your screen and move the slider.

This manual is also suitable for:

Aw-he130