Subscribe to Our Youtube Channel
Related Manuals for Prestigio MultiReader PER5574BC
Summary of Contents for Prestigio MultiReader PER5574BC
- Page 1 Quick Start Guide Prestigio MultiReader PER5574BC Packing list • Prestigio MultiReader • AC adapter • USB cable • Quick start guide • Warranty card • Legal and safety notices Device Overview EN-1...
- Page 2 Quick Start Guide Prestigio MultiReader PER5574BC Power • Turn on/off the device; Suspend/Activate the device. Earphone Jack • Earphones connection. USB port • USB connection. Vol +\ Vol - • Adjust the volume level. Button Speaker • Emit sound, voice or music. Camera • Take photos. Reset • Reset the device if it fails to operate correctly. Micro SD Card • Insert Micro SD card. Slot Getting started 1. Charging • Insert the connector of adaptor to the USB port of the device and connect the power adapter to the wall socket for charging. • Normally it takes approximately 4 hours to fully charge the device. Operating the device while charging with the AC adapter may extend the time of full charging.
- Page 3 Quick Start Guide Prestigio MultiReader PER5574BC 3. Inserting a Memory Card • The device supports micro SD/SDHC cards. • To insert a Micro SD card, place the card connector towards the front side of the device and the printing side of the card towards the rear side of the device. • To remove the micro SD card, gently press the edge of the card to release the safety lock and pull the card out of the slot. Notice: When you are reading the file from micro SD card, please don’t remove it, or the device could fail to operate correctly. 4. Connecting to Wi-Fi • In the Home menu press the icon and select Settings icon to access the list of options. Select Wireless & networks. • If the Wi-Fi is off, tap on the Wi-Fi line to turn it on. • The device will scan for available Wi-Fi networks and display them at the right of the screen. • Tap on the network you want to connect to. Then tap inside the Wireless password field to make the virtual keyboard appear. Enter the required network information, tap on Enter, and then tap on Connect. • Your device will now attempt to establish a connection to the Wi-Fi access point with the network parameters you entered. 5. Transferring content from PC • Connect the device to your PC/Notebook via USB cable.
- Page 4 Quick Start Guide Prestigio MultiReader PER5574BC Technical Specifications Processor High performance ARM Cortex A8 at 1GHz Android 4.1 512MB DDR3 Display 7” TFT LCD, Capacitive multi-touch Resolution 800 x 480 pixels Storage capacity 4GB flash memory (about 2.0GB are accessible by user), Memory card slot supports micro SDHC card up to 32 GB Interfaces Micro USB 2.0 , Micro SD (micro SDHC compatible) Communications WiFi (802.11 b/g/n) Battery 3200 mAh Li-Pol battery Dimensions 192 x 116 x 10.7mm (L x W x H) Weight 305 g Disclaimer As the Prestigio products are constantly updated and improved, your device’s software and hardware may have a slightly different appearance or modified functionality than presented in this Quick Start Guide. Prestigio hereby states that this MultiReader complies to basic requirements and another relevant regulations given by the EU directive 1999/5/EC. Full version of the declaration of conformity is available on: http://www.prestigio.com/compliance. To prevent possible hearing damage, do not listen at high volume levels for long periods.
Need help?
Do you have a question about the MultiReader PER5574BC and is the answer not in the manual?
Questions and answers