Related Manuals for IceTech IceBlast KG30 Series
Summary of Contents for IceTech IceBlast KG30 Series
- Page 1 IceBlast KG20 IceBlast KG50 Professional IceBlast KG6 IceBlast KG30 Professional MANUAL for kg50 kg30 professioNAL Uk Us UK_Manual omslag pro.indd 1 10-09-2009 13:45:39...
- Page 2 UK_Manual omslag pro.indd 2 10-09-2009 13:45:39...
-
Page 3: Table Of Contents
MANUAL for kg50 kg30 ProfessioNAL CoNTeNTs geNerAL iNforMATioN sHUTTiNg DoWN • Dry AND Thermal Cleaning Process 2 THe DrY iCe BLAsTiNg MACHiNe • No residual Blasting Media eMergeNCY sToP DrY iCe BLAsTiNg – How it operates • Dry ice Pellets PreCAUTioNs –... -
Page 4: General Information
MANUAL for kg50 kg30 ProfessioNAL geNerAL iNforMATioN the dry ice blasting machine and its accessories has this change from a solid to a gaseous form, the been developed with the aim of supplying cleaning accompanying tremendous expansion in volume, equipment which minimises consequential cleaning the high kinetic energy and the low temperatures costs and combines the best characteristics of sand are the most important factors which result in the... -
Page 5: Safety Regulations
MANUAL for kg50 kg30 ProfessioNAL sAfeTY regULATioNs general this manual contains instructions and safety regula- tions which must be followed while starting, opera- ting and maintaining the dry ice blasting machine. it is important that the manual is kept so that the Precautions during Blasting operator always knows its exact location. -
Page 6: Static Electricity
MANUAL for kg50 kg30 ProfessioNAL static electricity Danger of Thrown Loose objects serious discharge of static electricity can occur. there is a risk of dry ice pellets and small objects always make sure that objects to be cleaned are being thrown back during blasting. therefore small adequately earthed/grounded and that this ear- objects must be firmly secured before blasting. -
Page 7: Dust
MANUAL for kg50 kg30 ProfessioNAL Concentrations Dust dry ice pellets are co in a solid form. at normal certain types of dust have a tendency to pulverize atmospheric pressure, co can only exist in a solid during the cleaning process. therefore we recom- form at a temperature of -79°c/-110°f or lower. -
Page 8: Machine Illustrations
MANUAL for kg50 kg30 ProfessioNAL MACHiNe iLLUsTrATioNs 1 handle on pellet tank cover. 7 machine wheel brakes. ger switch on the blasting must remain applied when gun is activated. as soon as 2 pellet tank cover. the machine is in operation. the trigger switch on the maintained in open position blasting gun is released, the... - Page 9 MANUAL for kg50 kg30 ProfessioNAL MACHiNe iLLUsTrATioNs compressed-air-driven 6 signal cable from blasting important! vibrator on the pellet tank. hose. transfers signals from When lifting with a forklift A Kg50 pro. the trigger switch on the truck, make sure that the forks B Kg30 pro.
-
Page 10: Control Panel
MANUAL for kg50 kg30 ProfessioNAL CoNTroL PANeL 1 machine on. 2 machine off. 3 menu. display of machine functions. 4 arrow keys. manoeuvring around in menus. adjusting machine. 5 display. display of menus. display of actual blasting NEVER AIM THE BLASTING DANGER OF DANGER OF ELECTROSTATIC DANGER OF CONGELATION! -
Page 11: Icegun Professional Multitouch
MANUAL for kg50 kg30 ProfessioNAL iCegUN ProfessioNAL MULTiToUCH light safety switch 10 two-step trigger - blasting with dry ice and air - blasting with air only signal cable blasting nozzle – interchangeable Remote control of: Dry Ice BlastIng equIpment light on/off change between dry ice consumption and blasting pressure adjustment “down”... -
Page 12: Starting The Dry Ice Blasting Machine
MANUAL for kg50 kg30 ProfessioNAL sTArTiNg THe DrY iCe BLAsTiNg MACHiNe setting Up 1 make sure the machine is on a level, horizontal surface, and that the wheel brakes are applied. 2 plug the blasting hose couplings into the socket on the machine front and the blasting gun, respectively. - Page 13 MANUAL for kg50 kg30 ProfessioNAL 8 check to make sure that the machine is in normal operating position (the emergency stop button is pulled out). 9 turn the machine on (press the green on key). 10 activate the trigger switch on the blasting gun for a few seconds to allow air to flow through the system.
-
Page 14: Shutting Down The Dry Ice Blasting Machine
“ The operator must NEVER repair the blasting hose without using original iceTech spare parts!! ” UK_Manual KG50 - KG30 Pro.indd 12... -
Page 15: Blasting Hose Repair
1 pay special attention to places on the blasting an IceTech technician OR by the owner’s qualified hose where kinks may have occurred during personnel having been trained by icetech in the operation. repair and maintenance of icetech dry ice blasting machines and accessories. beyond the necessary... -
Page 16: Repair And Warranty
disposal. -
Page 17: Control Panel Symbols
MANUAL for kg50 kg30 ProfessioNAL CoNTroL PANeL sYMBoLs IceTech [kg/h] [Bar] 45.0 Set val. Act.val sYMBoLs Program locked No grounding/earthing Grounding/earthing OK Menu OK/Enter Upwards Downwards Backwards forwards User password superuser password service password “ Dry ice pellets evaporate immediately on striking the object. -
Page 18: Program Setting And Storing
IceTech [kg/h] [Bar] 45.0 Set val. 5 Setup 5.2 Language Act.val. Service English Language Danish Dosing disc type German Return Return SURVEY – DOSING DISC TYPES 5 Setup 5.3 Dosing disc type Superuser password Dosing disc 1 = kg/h: 30-100 lbs/h:... -
Page 19: Nozzle Selection And Air Consumption
MANUAL for kg50 kg30 ProfessioNAL NoZZLe seLeCTioN AND Air CoNsUMPTioN Nozzle Diameter and spread Angle Air Consumption Table The nozzle selection should be based on finding the air consumption table indicates the air con- the best combination of air consumption, dry ice sumption in relation to nozzle size and blasting consumption and cleaning efficiency. -
Page 20: Technical Data
MANUAL for kg50 kg30 ProfessioNAL TeCHNiCAL DATA Power Consumption iceBlast kg30 Pro ¾” 110/230 V Dimensions (mm/inch) ac 50-60 hz length: 580 / 22.8 800 W Width: 550 / 21.6 height: 800 / 31.4 Blasting hose, ¾” Weight Single Hose System kg: 85 lbs: 187 Noise... -
Page 21: Iceblast Kg50 Pro ¾
MANUAL for kg50 kg30 ProfessioNAL TeCHNiCAL DATA Power Consumption iceBlast kg50 Pro ¾” 110/230 V Dimensions (mm/inch) ac 50-60 hz length: 700 / 27.5 800 W Width: 550 / 21.6 Height: 900 / 35.4 Blasting hose, ¾” Weight Single Hose System lbs: 198 Noise Dry Ice Capacity... -
Page 22: Iceblast Kg50 Pro 1
MANUAL for kg50 kg30 ProfessioNAL TeCHNiCAL DATA Power Consumption iceBlast kg50 Pro 1” 110/230 V Dimensions (mm/inch) ac 50-60 hz length: 700 / 27.5 800 W Width: 550 / 21.6 Height: 900 / 35.4 Blasting hose, 1” Weight Single Hose System lbs: 198 Noise Dry Ice Capacity... - Page 23 MANUAL for kg50 kg30 ProfessioNAL UK_Manual KG50 - KG30 Pro.indd 21 02-06-2009 11:56:09...
- Page 24 MANUAL for kg50 kg30 ProfessioNAL icetech a/s industrivej 62 6740 bramming denmark +45 7656 1500 UK_Manual KG50 - KG30 Pro.indd 22 02-06-2009 11:56:10...
- Page 25 UK_Manual omslag pro.indd 3 10-09-2009 13:45:39...
- Page 26 UK_Manual omslag pro.indd 4 25-01-2010 12:25:34...
Need help?
Do you have a question about the IceBlast KG30 Series and is the answer not in the manual?
Questions and answers