Canon 1188B001 Instruction Manual page 96

96 Trouble?
Direct Print Related Messages
NOTES
About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error message
appears on the printer's operation panel, refer to the printer's instruction manual.
Message
PAPER ERROR
NO PAPER
PAPER JAM
INK ERROR
NO INK
LOW INK LEVEL
INK ABSORBER FULL
• FILE ERROR
• CANNOT PRINT!
COULD NOT PRINT X
IMAGES
SET PRINT ORDER
PRINT ORDER ERROR
CANNOT TRIM
READJUST TRIMMING
PRINTER ERROR
PRINT ERROR
HARDWARE ERROR
COMMUNICATION
ERROR
CHECK PRINT SETTINGS
There is a problem with the paper. Wrong paper size is inserted or the ink
cannot be used with the selected paper.
Or, if the paper output tray is closed, open it to print.
Paper is not correctly inserted or there is no paper.
The paper jammed during printing. Select [STOP] to cancel printing. After
removing the paper, set some paper again and retry printing.
There is a problem with the ink.
The ink cartridge is not inserted or is out of ink.
The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
printing.
Select [CONTINUE] to resume printing. Consult a Canon Service Center
(refer to the list included with the printer) to replace the ink absorber.
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.
No still image on the memory card has been marked with a
You attempted to set more than 998 still images in the print order.
You attempted to trim an image that was recorded with another camcorder.
You changed the print style after you set the trimming settings.
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error still persists, refer to the printer's instruction manual and
contact the appropriate customer support center or service center.
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
The printer is experiencing a data transfer error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing using
the button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
The print setting cannot be used for printing with the
Explanation
button, check the print settings.
print order.
button.