Page 12
® Bluetooth Hearing Protection Headset User instructions...
Page 13
® Congratulations and thanks for your choosing EARMOR ® EARMOR Hearing Protectors designed to protect users from harmful noise. Overview...
Page 14
① Headband ⑤ Microphone ② Slider ⑥ 3.5mm AUX-in socket ③ LED indicator ⑦ Type-C charging port ④ Multi-function button...
Page 15
APPROVED EARMOR® C30 headset is tested and certified according to the following standards: ANSI S3.19-1974 EN 352-1:2020 EN 352-6:2020 Noise Reduction Rating : 27dB ® EARMOR C30 Attenuation data, American National Standards Institute specifications: ANSI S3.19-1974 125 250 500 1000 2000 3150 4000 6300 8000 NRR TEST FREQ.(Hz)
Page 16
If you have any discomfort or infection in your ear, please consult a relevant doctor before wearing the headset to avoid causing hearing impairment or loss. For ® proper use, see user instructions or contact EARMOR customer service Email: cs@earmor.com TO REDUCE THE SAFETY RISK WHEN USING THE PRODUCT The product has a built-in lithium-ion battery, please do not open, squeeze, or heat above 50 °...
Page 17
® blue, and you will hear "Bluetooth Paring On"; ® - The unit Bluetooth pairing name is C30. ® ® - You will hear“Bluetooth Connected” after Bluetooth connected successfully. - The unit will connect back the last device automatically.
Page 18
Charging - Connect the TYPE-C interface through the charging cable for charging. When the headset is in the charging state, the indicator light is red; and when the headset is fully charged, the indicator switch off. * Do not open the battery compartment or replace the battery by yourself. EN 352 SAFETY INFORMATION - The output of the level-dependent circuit of the hearing protector may exceed the external sound level.
® ® EARMOR C30 Bluetooth Hearing Protection Headset is warranted to be free of defects in material and workmanship for a period of 1 year from the date of original purchase. The warranty is nullified in all of the following situations: 1.
Need help?
Do you have a question about the C30 and is the answer not in the manual?
Questions and answers