VersaDesk POWER PRO Elite Assembly Instructions

POWER PRO Elite
With your Desktop Riser on a desk or table, locate the cable underneath the unit's top surface.
1
Connect that cable to the power supply included, and then plug the unit into a power outlet.
2
Push the button to raise the top surface of your desk riser to the maximum height. Ensure the
power cord goes under the scissor arm and through the side opening as illustrated.
Elite Switch
UP
UP Down
DOWN
3
Align the holes on the bracket with the threaded inserts on the keyboard surface. Secure the bracket
to the keyboard surface using (4) 12mm Furniture Bolts. Attach the (2) bumpers to the bracket by
Locate the 4 thumb screws in plastic bag (the shape of the thumb screws may be different from
3
peeling them off the plastic to reveal the adhesive.
the diagram. Insert the 4 thumb screws half way leaving a 1/4" gap between the thumb screw
and the bottom of the top surface.
®
NOTE:
Power cord damage caused by failure to properly secure cord
away from scissor arm mechanism is not covered under warranty.
UP
Designed in Los Angeles, CA
Protected by US Patent No. 10,485,336 & 10,849,424
Assembly Instructions Assembly Instructions
adult use only. Children
should not operate
this device.
Lifetime Warranty
VDPPE
REV. 07232024
This product is for
1 (888) 506-2931
support@versaproducts.com