System Board; Removing The System Board - Dell Inspiron 14 5441 Owner's Manual

Figure 56. Installing wireless card thermal plate
10. Replace the screw (M2x2.5) that secures the wireless card thermal plate to the palm-rest and keyboard assembly.
Next steps
1. Install the fan.
2. Install the base cover.
3. Follow the procedure in

System board

Removing the system board

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the solid state
4. Remove the fan.
5. Remove the heat sink.
NOTE: The system board can be removed and installed with the heat sink still attached to it. By keeping the heat sink
attached to the system board, the thermal adhesive remains intact, thus preserving the thermal dissipation.
About this task
The following image indicates the connectors on your system board.
After working inside your
Before working inside your
drive.
computer.
computer.
Removing and installing Field Replaceable Units (FRUs) 75