Download Print this page

Paradise Datacom U000-9125 Instructions

6-piece landscape lighting kit

Advertisement

Quick Links

READ, FOLLOW AND SAVE THESE INSTRUCTIONS
Path lights
x6
Luminaires
DEAR CUSTOMER,
Congratulations on your purchase of a PARADISE
many years of enjoyment. PARADISE
the many other PARADISE
®
To ensure the maximum performance of your garden light, please read and save these instructions.
Replacement parts may be ordered by using the fixture model number and the part's name.
CHÈRE CLIENTE, CHER CLIENT,
Nous vous félicitons pour votre achat d'un luminaire PARADISE
nombreuses années de plaisir. PARADISE
produits PARADISE
®
pourra vous conseiller sur nos nombreux autres produits et vous aider à créer votre propre paradis.
Afin d'assurer la meilleure performance possible de votre éclairage de jardin, veuillez lire et conserver ces instructions.
Les pièces de rechange peuvent être commandées avec le numéro de modèle du luminaire et le nom de la pièce.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS:
• Do not look directly into this light.
• WARNING - Risk of Electric Shock. Install all luminaires and power unit10 feet (3.05 m) or
more from a pool, spa or fountain.
• Install in accordance with all local codes and ordinances.
Only for use with low voltage power units with a maximum output rating of 15V, 300W per
secondary.
• Do not use an extension cord with the transformer as an input.
• WARNING - Risk of Electric Shock. When used outdoors, install only to a covered Class A
GFCI protected receptacle that is weatherproof with the power unit connected to the
receptacle. If one is not provided, contact a qualified electrician for proper installation.
Ensure that the power unit and cord do not interfere with completely closing the receptacle
cover.
• WARNING - Risk of Electric Shock. Mount the power unit at a height greater than 1 foot
from the ground surface.
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instruc-
tions for power units.
The power unit is intended to be correctly oriented in a vertical position.
Pathlight ETL listed under model #U000-9125
1-888-867-6095 • customerservice@sternohome.com • servicealaclientele@sternohome.com • www.sternohome.com
CATALOG/CATALOGUE : 1001238434
MODEL / MODÈLE: #U000-9125
Transformer
x1
Transformateur
®
lighting product. Our products will help to enhance the beauty of your home and provide
®
offers a wide selection of lighting products of the highest professional quality. Ask your dealer about
products that will help to create your own paradise.
®
offre une grande variété de luminaires de la plus haute qualité professionnelle. Votre dépositaire de
CUSTOMER SERVICE
VEUILLEZ LIRE, SUIVRE ET CONSERVER CES INSTRUCTIONS
Low Voltage LED
6-piece landscape lighting
kit
Basse tension à DEL
ensemble de 6 lumières
pour éclairage de jardin
Landscape wire
50' • (15,24 m)
x1
Câble pour jardin
50 pi • 15,24 m
®
. Nos produits vous aideront à embellir votre demeure et vous procureront de
INSTRUCTIONS PERTINENTES CONCERNANT LES CAUSES DE BRÛLURES
OU DE BLESSURES. IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
ATTENTION - Afin de réduire les risques de FEU OU DE BLESSURES :
• Éviter de regarder directement la lumière.
• ATTENTION - Risque de chocs électriques. Installer tous les luminaires et transformateur à
3.05 m (10 pieds) ou plus d'une piscine, d'un spa ou d'une fontaine d'eau.
• Faire l'installation de ce module en conformité avec les codes et les règlements en vigueur
dans votre région.
Votre système d'éclairage à bas voltage doit être utilisé avec un bloc d'alimentation contenant un
amplificateur de 15V maximum et de 300W par unité secondaire.
• Ne pas utiliser une rallonge avec le transformateur comme entrée électrique.
• ATTENTION - Risque de choc électrique. Lorsqu'il est utilisé à l'extérieur, installer uniquement
à un réceptacle identifié GFCI (prise homologuée avec prise de mise à la terre) au bloc
d'alimentation connecté au réceptacle. S'il n'est pas fourni, contactez un électricien qualifié pour
une installation correcte. Veiller à ce que le bloc d'alimentation et le cordon ne gênent pas pour
fermer complètement le couvercle du récipient.
• ATTENTION - Risque de choc électrique. Monter le bloc d'alimentation à une hauteur
supérieure à 1 pied de la surface du sol.
CONSERVER CES INSTRUCTIONS - Ce manuel contient des consignes de sécurité et
d'exploitation importants pour les blocs d'alimentation.
Le bloc d'alimentation doit être correctement orienté dans une position verticale.
Luminaire listé ETL sous le modèle #U000-9125
SERVICE À LA CLIENTÈLE
x1
Photo sensor
Détecteur de lumière
5001-1001238434-BIL_031819

Advertisement

loading
Need help?

Need help?

Do you have a question about the U000-9125 and is the answer not in the manual?

Questions and answers

Summary of Contents for Paradise Datacom U000-9125

  • Page 1 Le bloc d’alimentation doit être correctement orienté dans une position verticale. The power unit is intended to be correctly oriented in a vertical position. Luminaire listé ETL sous le modèle #U000-9125 Pathlight ETL listed under model #U000-9125 SERVICE À LA CLIENTÈLE CUSTOMER SERVICE 1-888-867-6095 •...
  • Page 2 Assembly of the Light Fixture Assemblage du luminaire 1.1 Retirer soigneusement le luminaire de son emballage protecteur. 1.1 Carefully remove the fixture from its protective packaging. 1.2 Passer le fil à travers le poteau et l’ouverture du piquet. 1.2 Pass the wire through the post and through the opening 1.3 Assembler le piquet, le poteau et la lentille en les pressant ensemble.
  • Page 3 2. Trouver un emplacement adéquat pour le 2. Find a location for the transformer and photo sensor 2.1 Outdoor use, weather resistant. transformateur et le détecteur de lumière. 2.2 Do not install the photo sensor behind shrubs. It will affect 2.1 Utilisation extérieur, à...
  • Page 4 Connect the fixture wire to the landscape wire ATTENTION CAUTION Connexion du câble du luminaire au câble pour jardin SOYEZ PRUDENT ! BE CAREFUL! LES POINTES DES THE WIRE STABS ARE VERY CONNEXIONS SONT TRÈS ACÉRÉES ! SHARP! 7.1 Place the wire connector on 7.2 Align and fit the main low voltage 7.3 Press the wire connector together until fully 7.4 Once the clip-on connector is in place, wrap...
  • Page 5 1 1. Maintenance Troubleshooting Dépannage • To clean, wash with a damp soft cloth. • Check that the power is on. • Replacement parts may be ordered by using the fixture model All of the lights fail to • Check if there is a loose connection at the work number and the part’s name.

This manual is also suitable for:

1001238434