Subscribe to Our Youtube Channel
Related Manuals for Matador MG12MD
Summary of Contents for Matador MG12MD
- Page 1 INSTRUCTION MANUAL Original instructions for MEAT MINCER (MEAT GRINDER) MG12MD / MG22MD / MG32MD Keep these instructions with the appliance. You should read this user manual carefully before using the appliance.
-
Page 2: Intended Use
Dear Customer, Thank you for purchasing this appliance. Please take a few minutes before starting operation of the appliance and read the following operating instructions. 1. Intended use 1.1 This machine is designed for commercial used only and must not be used for household. - Page 3 2.1.11 Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. To pull the plug out of the socket, always pull on the plug and not on the cord. 2.1.12 Ensure that the cord (or extension cord) is positioned so that it will not cause a trip hazard.
-
Page 4: Product Description
2.2.6 Caution! Securely route the power cord if necessary, in order to prevent unintentional tripping over and falling. 2.2.7 Do not use the appliance before it is properly assembled. 2.2.8 This appliance is not intended to be operated by means of an external timer or separate emote-control system. -
Page 5: Main Technical Parameters
3.2 MAIN TECHNICAL PARAMETERS MODEL VOLTAGE POWER Speed A (mm) B (mm) C (mm) SIZE MG12MD 550W 50x31.5x55 cm 220V-240V~ MG22MD 50/60Hz, 735W 170RPM 50x31.5x55 cm 115V~60Hz MG32MD 900W 49.5x32x58 cm Remark: Technical specification is subjected to change without prior notification. -
Page 6: Installation
4 Introduction Preparation for first use 4.1.1 Check to make sure the appliance is undamaged. In case of any damage, contact your supplier immediately and do NOT use the appliance. 4.1.2 Remove all the packing material and protection film (if applicable). Keep the packaging for future storage. - Page 7 4.4.1.4 Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage, do not use the appliance but contact your dealer. 4.4.1.5 Clean the pusher, feeder pan, mincer head, hole plate, coupling cover, and other parts which contact with meat.
- Page 8 machine identification plate and wiring diagram). The machine comes equipped with an electric cable with plug. Plug the machine into a main wall switch with differential. 4.5 OPERATING 4.5.1 Preparation 4.5.1.1 Make sure the appliance is unplugged from the electrical power supply, the switch is on “OFF”...
-
Page 9: Circuit Diagram
4.6 Cleaning 4.6.1 It is important to keep the appliance clean and in good working condition to ensure optimum quality of the products and long life of the appliance. 4.6.2 Never immerse the appliance in water or other liquids. 4.6.3 To clean the motor housing, unplug the appliance and clean with a damp cloth or sponge with some mild soap solution. -
Page 10: Exploded View And Spare Parts Lists
6 Exploded view and spare parts lists 4 5 6 9 10 12 13 14 15 19 20 22 21 English Name English Name English Name Aluminum body Cutting chamber S/S Coupling cover Rubber pad Feeder pan Sausage tube Motor Pusher Power cord Big gear A...
Need help?
Do you have a question about the MG12MD and is the answer not in the manual?
Questions and answers