Related Manuals for Matador RADIANT REVOLVE GB0350
Summary of Contents for Matador RADIANT REVOLVE GB0350
- Page 1 Before using the BBQ, remove any packaging material within and around the BBQ supplied for protection during transit. RADIANT REVOLVE GB0350 Retain manual for further reference.
-
Page 2: Table Of Contents
Part diagrams Hardware list Assembly instructions 12-21 Warranty 22-24 CONTACT INFORMATION For spare parts, order from your nearest Bunnings Warehouse. For service and warranty queries, please contact Mayo Hardware at matador@mayohardware.com.au or call; 1300 360 211 (AUS) 09 415 6240 (NZ) -
Page 3: Features & Benefits
Chrome Plated Enamel Grate Handle support post Cooking Firebowl Grate Assembly Grate Lifter Easy Windbreak Tidy Storage Charcoal Attachment Grate With ash tray BBQ DIMENSIONS Length Width Height 932 mm 416 mm 693 mm Metal Fixing Screw MATADOR INSTRUCTION MANUAL... -
Page 4: Important Safety Information
Important safety information Read the Instruction Manual thoroughly before assembling or using the Rotisserie BBQ. CAUTION: FOR OUTDOOR USE ONLY. • Estimated assembly time is 30-45 minutes. • Never leave hot coals and ashes in the BBQ • Only use this BBQ on a hard, level, non- unattended. -
Page 5: Do's & Don'ts
DO NOT attempt to move the BBQ. • Wear protective BBQ gloves. • DO NOT touch any hot BBQ surfaces • Keep children away from hot surfaces • DO NOT wear loose clothing or allow hair to come in contact with the BBQ. MATADOR INSTRUCTION MANUAL... -
Page 6: Positioning The Bbq
Positioning the BBQ • Any enclosure in which the BBQ is used shall • This BBQ should only be used in an above ground, open air situation with natural comply with one of the following: • An enclosure with walls on one side, but at least ventilation. -
Page 7: Before You Cook
Firebowl. out the weight on the rod. This will help keep the load on the motor even and provide a smooth rotation during the cook. MATADOR INSTRUCTION MANUAL... -
Page 8: Regulating Temperature
Adding fuel during cooking Additional charcoal may be required to maintain or Step 2 - Stand back at a safe distance and use increase cooking temperature. longcharcoal tongs to add charcoal to charcoal grate, being careful not to stir-up ashes and sparks. If Step 1 - To access the charcoal grate you will firstly necessary, use your Charcoal Chimney Starter to need to safely lift up your cooking grate using the... -
Page 9: Exploded Parts Diagram
Exploded Parts Diagram MATADOR INSTRUCTION MANUAL... -
Page 10: Part Diagrams
Part diagrams 2pcs 2pcs 1pcs 1pcs 1. Cooking Grate 4. Rod RH Support 2. Cast Forks 3. Spit Rod 1pcs 5pcs 1pcs 1pcs 5. Spit Rod Extension 6. Spit Rod Bolt 7. Rod LH Support 8. Rotisserie Handle 1pcs 2pcs 1pcs 1pcs 10. -
Page 11: Hardware List
Hardware list Part Name Hardware Image Quantity BOLT HEX - M5 X 12 BOLT - M6 X 12 WASHER Ø5/12 WASHER Ø6/12 HEX NUT - M5 HEX NUT - M6 MATADOR INSTRUCTION MANUAL... -
Page 12: Assembly Instructions
Assembly Instructions It is important to read these instructions thoroughly. If you have any problems, difficulties or concerns please contact the manufacturer or retailer. Read all safety warnings and assembly instructions carefully before assembling or operating your BBQ. Inspect contents of the box to ensure all parts are included and undamaged. - Page 13 Assembly Instructions Step 1 - Attach legs to firebowl Hardware Needed BOLT HEX - M6 X 12 NOTE: This stage will require a Phillips head screwdriver to help tighten WASHER Ø6/12 the securing hardware. 20 x4 MATADOR INSTRUCTION MANUAL...
- Page 14 Assembly Instructions Step 2 - Attach leg supports Hardware Needed BOLT - M6 X 12 WASHER Ø6/12 NOTE: This stage will require a Phillips head screwdriver and a socket set (or adjustable wrench) to tighten HEX NUT - M6 the securing hardware. 21 x4...
- Page 15 BOLT HEX - M6 X 12 WASHER Ø5/12 NOTE: This stage will require a Phillips head screwdriver and a socket set (or adjustable wrench) to tighten HEX NUT - M5 the securing hardware. 14 x2 15 x2 MATADOR INSTRUCTION MANUAL...
- Page 16 Assembly Instructions Step 4 - Assemble spit rod 6 x5 Step 5 - Assemble charcoal tray 18 x2...
- Page 17 Assembly Instructions Step 6 - Insert charcoal tray Step 7 - Attach rotisserie rod assembly MATADOR INSTRUCTION MANUAL...
- Page 18 Assembly Instructions Step 8 - Assemble lid / windbreak Hardware Needed - M6 X 12 WASHER Ø5/12 NOTE: This stage will require a Phillips head screwdriver and a socket set (or adjustable wrench) to tighten HEX NUT - M5 the securing hardware. 10 x2...
- Page 19 Assembly Instructions Step 9 - Step 10 MATADOR INSTRUCTION MANUAL...
- Page 20 TORAGE TEPS Step 1 - Remove components...
- Page 21 TORAGE TEPS Step 2 - Store components inside firebowl and secure lid MATADOR INSTRUCTION MANUAL...
-
Page 22: Warranty
Thank you for purchasing one of our quality Matador BBQs. YOUR MATADOR BBQ IS COVERED AGAINST BURN THROUGH AND RUST THROUGH OF THE FIRE BOWL AND LID FOR A PERIOD OF 10 YEARS, FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT. - Page 23 To make a claim under warranty, take the product (with proof of purchase) to any Bunnings store (see www. bunnings.com.au for store locations) or contact Mayo Hardware Pty Ltd matador@mayohardware.com.au. Mayo Hardware Pty Ltd bears reasonable, direct, expenses of claiming under warranty. You may submit details and proof to Mayo Hardware Pty Ltd for consideration.
- Page 24 Registering you BBQ REGISTERING YOUR BBQ FOR WARRANTY We recommend you register your Matador BBQ to make it easier for you in the event that you ever have any warranty claims. To register your warranty please scan the QR CODE below to be taken to our online registration page.
- Page 25 Notes MATADOR INSTRUCTION MANUAL...
- Page 26 Visit www.matadorbbqs.com.au For technical and warranty support call 1300 360 211 (AUS) 09 415 6240 (NZ) Your purchase receipt will be required for warranty claims. For spares parts contact your local Bunnings Warehouse. PB0161a...
Need help?
Do you have a question about the RADIANT REVOLVE GB0350 and is the answer not in the manual?
Questions and answers