tm
Digital Dash Control
Owner's Enjoyment Manual
Greetings from the rainforest!
Congratulations on your purchase of the AudioControl Digital
Dash Control or DDC as it is known by its closest friends. The
DDC will allow you to now extend the unique operations of your
AudioControl digital processor to other parts of your vehicle while
giving you direct access to the various memory locations. Imagine
having settings that will optimize Rock and Roll, another one brings
out the vocals of your favorite Pop star, while another can maximize
the overall SPL of your vehicle to impress your buds (or buddettes).
With the DDC in place, all this is now possible. Change the settings
of your AudioControl digital processor by just tapping a few buttons.
Now, while you are salivating just thinking about the benefits of
the DDC, take a few minutes to sit back, grab a beverage and read
through this manual. Although the DDC is one of the easier
products to install, we encourage you to take a few minutes to read
this manual nonetheless. It will answer any questions you may have.
For any specific operation questions about the AudioControl digital
processor you are connecting to your DDC, please refer to the
owner's manual for that individual processor.
making good sound better
®
22410 70th Ave. West • Mountlake Terrace, WA 98043
Phone 425-775-8461 • Fax 425-778-3166 • www.audiocontrol.com
page 1
DDC
tm
®
tm
WILL THE DDC WORK WITH MY
AUDIOCONTROL DIGITAL PROCESSOR?
The DDC was designed to work with all AudioControl digital
processors, both new and old, that are equipped with a Digital Dash
Control RJ-11 connector (looks like a phone connector). You can
connect your DDC to the following AudioControl Digital processors
and it will work immediately:
DQT:
Serial number DQ20022 or higher
DQX:
Serial number QX20019 or higher
If your AudioControl Digital processor was manufactured prior to
these serial numbers "don't worry" because your friends at Audio-
Control have got you covered. Even though these older AudioCon-
trol Digital processors were manufactured before we even thought of
the DDC, we can program your unit so it will work! Just contact us
at the AudioControl factory to make arrangements to get your trunk
processor (i.e. DQT or DQX) programmed. It will require your
AudioControl Digital Processor to visit our factory for program-
ming. However, unlike a nameless software company in the Pacific
Northwest, you won't have to buy any new hardware.
page 2
Need help?
Do you have a question about the DDC and is the answer not in the manual?
Questions and answers