Acer UM.HV7AA.G04 User Manual page 23

Input switch Hot Key
Open the Input control and select HDMI, DP,VGA or Auto Source. When you are done,
press the joystick to exit current page and store.
Input
Input
Auto Source
Adjust OK
Performance
Performance
Over Drive
Picture AdaptiveSync
Color Refresh Rate Num
Audio VRB
0SD
System
Information
Move Enter
1. Press the Menu Key to open the OSD.
2. Toggle the joystick to the up or down to select Performance Page from the OSD.Then
toggle to the right to the function you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to choose function.
4. The Performance Page can be used to adjust the Over Drive, AdaptiveSync, Refresh
Rate Num, VRB.
5. Over Drive: Select Off, Normal or Extreme.
6. AdaptiveSync: To control support AdaptiveSync or not, default is On.
-----------------------------------------------------------------------------------------------------------
Note:
1. If AdaptiveSync is "ON", then the Over Drive selection is set to "Normal"
automatically.
2. Please update AdaptiveSync to the latest AMD driver.
7. Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If AdaptiveSync set "On" you can see the V Frequency to changes in the OSD.
8. VRB: To choose whether to support dynamic picture more clean control, default is Off.
DP
On
1280x800 75
Standard
Mode
Resolution Hz
Exit
DP Off
Input AdaptiveSync