Page 1
ENCORE PRO USER MANUAL Ningbo Welldon Infant And Child Safety Technology Co.,Ltd. www.welldon.com...
Page 2
Digital Manual Certification This child car seat features ISOFIX for easier installation, ensuring maximum safety and comfort for your baby during travel. Recommended for: Age: From approx. 15 months up to 12 years Stature: 76-150cm This seat can only be installed in a forward-facing position in the vehicle.
Basic Information Basic Information Use In The Vehicle Proper seating positions for your child car seat. If you need to install the seat in the front passenger seat, please ensure that the airbag is deactivated to avoid serious injury. ENCORE pro WD025 Notice This is an i-Size Enhanced Child Restraint System (ECRS), approved...
Table of Contents 1.Warning 1.Warning………….……………………........The rigid items and plastic parts of the child car seat should be located and installed so that they are not likely 2.Product Description………………………………………. to become trapped by a movable seat or in the vehicle's 09-10 door during everyday use.
3.Basic Information 3.Basic Information Recline Position Adjustment There are 5 recline positions for this product. Pull the recline position adjustment handle(16), and push or pull the seat to the desired position. Top Tether Storage 100-150cm Headrest Height Adjustment The adjustable headrest has 12 positions. Adjust the headrest (1) to the most suitable height by vertically pulling the headrest height adjustment lever(7).
4.Instruction for Stature 76 - 105cm 4.Instruction for Stature 76 - 105cm Open the top tether storage (17), which is located at the back of the seat, and take out the top tether (19). Pull the ISOFIX release handle (12) to extend the ISOFIX connect locking arms (13).
Page 10
4.Instruction for Stature 76 - 105cm 4.Instruction for Stature 76 - 105cm Press the harness release button and pull the shoulder straps forward as far as possible to loosen them. Open the buckle by pressing the red button, then secure the shoulder straps to the sides of the car seat.
5.Instruction for Stature 100 -150cm 5.Instruction for Stature 100 -150cm Detach the top tether (19) from the hook. Open the cover of the top tether storage (17), properly assemble the top tether (19), then place it in the storage compartment and close the cover. Press the harness release button (4) and pull the shoulder straps (3) forward as far as possible.
6. Removing the Seat 6. Removing the Seat Unfasten the seat belt, ensuring the belt is removed from the should belt guide (6). Press the ISOFIX unlocking button (15) and the ISOFIX double- locking button (16) simultaneously. When the ISOFIX installation indicator (14) shows red, it means the ISOFIX connect locking arms (13) are disconnected from te fixture points.
8. Care and Cleaning 7. Important Safety Precautions Regularly inspect all components for any signs of damage. • Never leave your child unattended in the child safety seat, Verify the proper functioning of all mechanical parts regularly. especially when not in the vehicle. To avoid damage or breakage, ensure the child seat does not become •...
To validate the warranty, please keep the invoice Is the harness adjusted to the correct position according to the √ and register your product on welldon.com. size of the baby? √ Is the child’s height between 76-150cm? The Warranty Does Not Cover: •...
Need help?
Do you have a question about the ENCORE PRO WD025 and is the answer not in the manual?
Questions and answers