Page 1
HOUNÖ MOUNTING INSTRUCTION English Adjusting touch sensitivity after replacement of front or controller Visual Cooking ® CombiSlim ® All models Gas & electric Part number: 50001301 Version 12/2024 CAUTION: Read these instructions before servicing the oven...
TABLE OF CONTENTS INTRODUCTION SAFETY INFORMATION TOUCH DISPLAYS AND FRONT PANELS ADJUSTING THE TOUCH SENSITIVITY 30900089 Adjusting the touch sensitivity on ovens with green controllers ( Adjusting the touch sensitivity on ovens with blue controllers ( 50001124 SETTING THE OVEN MOUNTING INSTRUCTION - ADJUSTING TOUCH SENSITIVITY, 12/2024 3...
This mounting instruction contains information about how to adjust touch sensitivity after replacement of front or controller. This mounting instruction is valid for CombiSlim and Visual Cooking models. We recommend that you read and familiarise yourself with the instructions in this document before you start working on the ovens. Please make the mounting instruction available to all who service and maintain the oven and retain it for future reference.
SAFETY INFORMATION SAFETY INFORMATION Read this document before using, installing or servicing the product. Installation and operation must comply with local regulations and accepted codes of good practice. All maintenance and repair must be carried out by qualified installation and service technicians only. Installation and/ or service by others than qualified service technicians may result in injury to the operator and/or damage to the oven.
50001320 CS controller in housing - VCUX CPU REPL, kit For more information see the CombiSlim spare parts catalogue You find the spare parts catalogue for CombiSlim and Visual Cooking on www.houno.com. 6 MOUNTING INSTRUCTION - ADJUSTING TOUCH SENSITIVITY, 12/2024...
ADJUSTING THE TOUCH SENSITIVITY ADJUSTING THE TOUCH SENSITIVITY How to adjust the touch sensistivity depends on the type of controller: • To adjust the touch sensitivity on ovens with green controllers (30900089), follow the instructions in section “Adjusting the touch sensi- tivity on ovens with green controllers (30900089)”...
TOUCH DISPlAYS AND FRONT PANElS Adjusting the touch sensitivity on ovens with blue controllers (50001124) When replacing the front or controller, the new foil in front of the display might be thicker than the original one. As the default sensititivty on the touch display is too low or high, you must adjust the sensitivity directly on the controller.
Page 9
TOUCH DISPlAYS AND FRONT PANElS 7. Perform a touch test by moving your finger up and across the display. If it works, the sensitivity is OK. If it does not work follow step 9-13. Enter the menu, touch the gear wheel icon, and touch “Technician”. 10.
SETTING THE OVEN SETTING THE OVEN IMPORTANT! After replacement of the controller, front panel or touch display, make sure to configure the correct oven settings. Otherwise, the oven might not operate correctly. login as Technician (576021) and set the following: •...
Page 11
SETTING THE OVEN This page is intentionally left blank. MOUNTING INSTRUCTION - ADJUSTING TOUCH SENSITIVITY, 12/2024 11...
Page 12
CONTACT US As your combi oven specialist we do our utmost to help our customers. Worldwide. HOUNÖ A/S ALSVEJ 1 DK-8940 RANDERS SV DENMARK T: +45 8711 4711 E: houno@houno.com www.houno.com...
Need help?
Do you have a question about the Visual Cooking and is the answer not in the manual?
Questions and answers