Advertisement
Break Away Fitting for Demersible
IMPORTANT!
Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notification.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
INSTALLATION MANUAL
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
Pumps
®
Models: BAF-6
P/N: 091550B
Form No. 133726 Rev. B
Advertisement
Table of Contents
Related Manuals for Crane DEMING BAF-6
Summary of Contents for Crane DEMING BAF-6
- Page 1 Read all instructions in this manual before operating pump. As a result of Crane Pumps & Systems, Inc., constant product improvement program, product changes may occur. As such Crane Pumps & Systems reserves the right to change product without prior written notification. A Crane Co. Company...
-
Page 2: Safety First
Other brand and product names are trademarks or registered trademarks of their respective holders. ® Deming is a registered trademark of Crane Pumps & Systems, Inc. 1994, 1997, 1998, 2002, 3/06, 9/06 Alteration Rights Reserved... - Page 3 SPECIFICATIONS: BAF-6 (091550B) LOCATION: ......This BAF-6 is designed OPTIONAL: for wet wells, tanks, or INTERMEDIATE SUPPORT: lift stations where it is Bracket..304 Stainless Steel. necessary to remove Plugs ... Cast Iron, ASTM A48, a pump from service and Class 30.
- Page 4 inches (mm) Figure 2 Figure 1...
-
Page 5: Section: C Installation
BAF-6 standard assemblies Department in Piqua, Ohio, telephone (937) 778-8947 or use a Cast Iron moveable assembly and BAF-E6 Crane Pumps & Systems Canada Inc., Bramton, Ontario (905) non-sparking assemblies use a bronze moveable assembly. 457-6223. - Page 6 Figure 5 Duplex Installation (Optional) Figure 4 Duplex Installation (Standard) Figure 3 Simplex Installation...
-
Page 7: Section E: Replacement Parts
C-5) Thread Locking Compound: D-2.2) Stationary Base Elbow: Thread locking compound can be purchased locally To replace Guide Plug(s) (2B) on Stationary Elbow (2A), in small quantities. When used, they provide an extra remove socket head screw (2C). Inspect o-ring (2D) for assurance the bolted joint will remain together. - Page 8 Figure 6...
- Page 9 Figure 7...
- Page 10 PARTS LIST BAF-6 p/n: 091550B ITEM QTY. PART NO. DESCRIPTION 090083 Moveable Fitting Assembly 090081 Moveable Cast Iron, Class 30 090085 O-Ring, 6.50 I.D. Buna-N 090088B Stationary Base Elbow Assembly 090087 Stationary Base Elbow Cast Iron, Class 30 090086 Guide Plug Cast Iron, Class 30 1-93-1 Hex Hd.
- Page 11 OPTIONAL EQUIPMENT PARTS LIST 6” Intermediate Support Bracket p/n 111434A ITEM PART No. DESCRIPTION 090100A Intermediate Support Assembly 090094 Guide Rail Bracket Assembly Stainless 090086 Guide Plug, 2.563 O.D. Cast Iron 1-97-1 Hex Hd. Screw, ⅝-11 x 2.75 Lg. 18-8 SS 20-24-1 Split Lock Washer, ⅝”...
-
Page 12: Warranty Registration
IMPORTANT! WARRANTY REGISTRATION Your product is covered by a warranty: www.cranepumps.com/downloadables/CATALOGS_OIPMs/Warranty/24MonthWarranty.pdf If you have a claim under the provisions of the warranty, contact your local Crane Pumps & Systems, Inc. Distributor.
Need help?
Do you have a question about the DEMING BAF-6 and is the answer not in the manual?
Questions and answers