SmartAccess LSA-03-00 System Installation Manual

System Installation Manual LSA-03-00
Introduction
The Smart Access system lets you control a series of locks via your smartphone or computer
using Bluetooth and Wi-Fi (WiFi connectivity currently under development.) Please register your
device and sign up for email notifications so we can let you know when that feature is available).
This manual will cover how to set up your system, from electrical connections to installation on
furniture.
Note: It is recommended to set up the system on a work surface before installing in a
cabinet or drawer. Download the app, register at least two fingerprints and test the
system with the app and finger-touch sensor. When you are comfortable with the
operation and you are familiar with it proceed to installation.
Electrical connections
The first step to using your new Smart Access device is to connect the external peripherals as
shown below. Each connection has its own specially shaped connector.
The first 4-pin connection (to the right of the finger-touch sensor) - Port B can be utilized for an
accessory (Aux/Lock Port) such as a light. The other 4-pin connections - Ports A are intended
for locks. However, all 4-pin connectors can be used interchangeably for either an accessory or
a lock without restriction (Currently all 4-pin connectors are controlled through the finger-touch
sensor).
1