CORNING 5G Sub-6 N77 Installation And Operating Manual

Radio node

Advertisement

Quick Links

Corning
5G Sub-6 N77 Radio Node Installation and Operating Guide
Corning 5G Sub-6 N77 Radio Node
Installation and Operating Guide
☰ Property
Project name
Version
Date
Disclaimers
The information contained in this document is the proprietary and exclusive property of Corning except as
otherwise indicated. No part of this document, in whole or in part, may be reproduced, stored, transmitted,
or used for design purposes without the prior written permission of Corning.
The information contained in this document is subject to change without notice.
The information in this document is provided for informational purposes only. Corning specifically
disclaims all warranties, express or limited, including, but not limited, to the implied warranties of
merchantability and fitness for a particular purpose, except as provided for in a separate software license
agreement.
Privacy Information
This document may contain information of a sensitive nature. This information should not be given to
persons other than those who are involved in the Local 5G NR System project or who will become
involved during the life cycle
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
§ 15.105 (a) For class A digital device or peripheral
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Version: v1.9
Local 5G NR System
v1.9
2022/12/2
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5G Sub-6 N77 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CORNING 5G Sub-6 N77

  • Page 1 ⚠ Disclaimers The information contained in this document is the proprietary and exclusive property of Corning except as otherwise indicated. No part of this document, in whole or in part, may be reproduced, stored, transmitted, or used for design purposes without the prior written permission of Corning.
  • Page 2 This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Version History Version Date Description of revision v1.0 2022/7/12 Initial version of Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide v1.1 2022/8/25 Fix mistake v1.2 2022/10/27 Modify model no.
  • Page 3: Table Of Contents

    3.1.2 Antenna port number 4. Operating Instruction 4.1 Firmware upgrade 4.2 How to use the sample app to verify Corning 5G Sub-6 N77 Radio Node working properly? 4.3 How to export log of Corning 5G Sub-6 N77 Radio Node 5. FAQ 5.1 How to check if the O-RU is booted up?
  • Page 4 Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 6. Troubleshooting 6.1 Why the DU is not receiving any data from the RU? Version: v1.9...
  • Page 5: List Of Packages

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 1. List of Packages ● Applicable to below product: ○ Corning 5G Sub-6 N77 Radio Node ○ Corning 5G Sub-6 N77 External Antenna Radio Node ● Model Name: ○ SCRN-610-77 (Internal Antenna) ○...
  • Page 6 Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide Figure 1-2 Corning 5G Sub-6 N77 External Antenna Radio Node Specification Version: v1.9...
  • Page 7: Outlook

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 1.2 Outlook 1.2.1 Indoor Corning 5G Sub-6 N77 Radio Node Figure 2 Corning 5G Sub-6 N77 Radio Node Interfaces Version: v1.9...
  • Page 8: Mounting Kit

    Guide_v1.0 ” for the mounting bracket, wall-mount, ceiling-mount and rack-mount installation. 1.3 Software Version To show the current software version of Corning 5G Sub-6 N77 Radio Node. Please refer to the “ [RP0-415] Corning 5G Sub-6 N77 Radio Node Firmware Upgrade Guide “ Execute command “cat /home/root/test/version.txt”, it may looks like below:...
  • Page 9: Regulation And Certification

    ⚠ Warning: Hot parts. To avoid the risk of hot parts, please use the Corning 5G Sub-6 N77 Radio Node with caution, and wait at least 30 minutes before handling the Corning 5G Sub-6 N77 Radio Node after powering off.
  • Page 10: Cabling And Assembly Instruction

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 3. Cabling and Assembly Instruction Below the figure shows the SA L5G system. Figure 8 SA L5G System Architecture 3.1 Corning 5G Sub-6 N77 Radio Node cabling instruction 3.1.1 For O-RAN C/U/S/M-plane connection 10Gb SFP+ fiber cabling ●...
  • Page 11: Antenna Port Number

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 3.1.2 Antenna port number Version: v1.9...
  • Page 12: Operating Instruction

    4.2 How to use the sample app to verify Corning 5G Sub-6 N77 Radio Node working properly? Please refer to “[RP0-407] Corning 5G Sub-6 N77 Radio Node Sample App Operation Guide” for using sample-app to verify the FH connection (C/U-plane), S-plane and RF TX power.
  • Page 13: Faq

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 5. FAQ 5.1 How to check if the O-RU is booted up? non-oam mode: O-RU default IP is 192.167.27.49. We can ping this ip to check if O-RU is booted oam mode: O-RU works as DHCP client as default.We can check DHCP server if receiving DHCP...
  • Page 14: What Is The T-Tsc Clock Class For Ru? Is It Class B Or Class C

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 5.9 What is the T-TSC clock class for RU? Is it class B or class ● Class B 5.10 What is the max |TE| for the RU? ● 80 ns...
  • Page 15: Troubleshooting

    Corning 5G Sub-6 N77 Radio Node Installation and Operating Guide 6. Troubleshooting 6.1 Why the DU is not receiving any data from the RU? Please check the following items: 1. Check that PTP is synced plus the GM’s quality. You may need to check the GM’s status with satellites, O-RU’s log and O-DU’s log.

This manual is also suitable for:

Scrn-610-77Scrn-610-77-eq

Table of Contents