Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for YAGUD ZF-0301
Summary of Contents for YAGUD ZF-0301
- Page 1 TREADMILL User manual ZF-0301...
-
Page 2: Table Of Contents
Table of contents Attention nstructions for Safe Use Technical Parameter Packling List Product Description Screen Description Remote Control Description Treadmill Operation Plate Lubrication Exercise Advice Failure and Maintenance Warranty Description... - Page 3 ATTENTION When you receive or use this product, the following malfunctions may occur. You can troubleshoot the problem by following the steps below. Malfunction of Remote Control If the machine do not respond to the remote control when you “+”key recieve it , you may need to rematch them by following steps: 1.Before the treadmill is powered on, hold down the“+”key of the remote control and keep holding it (within 10cm of the...
-
Page 4: Instructions For Safe Use
Instructions for Safe Use Thank you for choosing our products. The correct use of the walking machine is your guarantee of safety and convenience. Please read the following carefully before using the walking machine: �. Power on only after confirming that the electric walking machine has been installed in accordance with the installation instructions. -
Page 5: Technical Parameter
Technical parameter Product No. ZF-���� Input Voltage ��� V Frequency �� hz Running Area ��.�×��.� inch Speed Range �.�-�.� mph Peak power �.� hp Function Walk Packling List Item � Complete machine （ Running platform） � Remote Controller � � �... -
Page 6: Product Description
Product Description Power Swtich LED Display Motor Cover Side Edging Running Belt Rear Guard Screen Description Indicator Display Numbers When machine is powered on, the LED screen showes“Eng”, then enter standby state and showes “00”. LED screen displays the following functions: speed, time, distance, calories. a. -
Page 7: Remote Control Description
Remote Control Description Attention: Attention: The plastic sheet must Open the battery rear cover be removed before use 1、First place one hand in this groove and apply force in thisdirection 2、At the same time, place the other handon the raised patternand apply force in this direction Remote Control Key Description a. -
Page 8: Treadmill Operation
Treadmill Operation Turn on the switch to start the treadmill. After display showes“Eng”, entered standby state and shows “��”. Stand on the treadmill. Mode 1: Speed mode ·Press the start button, machine will countdown � seconds and s tart running. Mode 2: Time countdown mode ·Press Mode button to switch to indicator of Time... -
Page 9: Plate Lubrication
Plate Lubrication The treadmill has been lubricated with silicone oil when leaving factory. After running for a period of time, the treadmill must be configured with special silicone oil for lubrication. Correct lubrication of the treadmill with silicon oil is important. Lubrication must be taken regularly depending on its usage even before the first time. -
Page 10: Exercise Advice
Exercise Advice Consult a professional before exercising. He can help you recommend the frequency, intensity and duration of exercise appropriate for your age and physical condition. If you feel chest tightness or pain, irregular heartbeat, shortness of breath, dizziness or other discomfort while exercising, please stop immediately! Consult a professional before continuing to exercise. -
Page 11: Failure And Maintenance
Failure and Maintenance Power Cord This product must be earthed. If the power cord is damaged,it must be replaced with a manufacturer recommended power cord. DO NOT TANGLE THE POWER CORD. Regular Maintence Keep your equipment in a enclosed place, away from dust or humidity. Storage: Don’t store the machine neither in garage or indoor backyard, or near water. -
Page 12: Warranty Description
Error Code Causes Possible Reasons Solutions Upper and lower controller Reconnect the upper and lower controller cables are in poor contact cables Motor driver failed to receive LED Upper and lower controller Replace the cables Er � digital screen signal cables are broken LED digital screen is damaged Replace LED digital screen... - Page 13 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the ZF-0301 and is the answer not in the manual?
Questions and answers