Fractions - Texas Instruments TI-34 - MultiView Scientific Calculator User Manual

%i %Y 60 <
17589 seconds equals 4 hours, 53 minutes, and 9 seconds.

Fractions

P @
In the MathPrint™ mode, fractions with P can include
operation keys (T, V, etc.) and most function keys (F, _,
etc.).
In Classic mode, fractions with P do not allow operation
keys, functions, or complex fractions in the numerator or
denominator.
Note: In Classic mode and Data editor, use W to perform
complex division problems.
Calculations using fractions can display fraction or decimal
results, depending on input.
• P enters a simple fraction. Pressing P before or after a
number can result in different behavior. Entering a number
before pressing P makes that number the numerator.
To enter fractions with operators, press P before you
enter a number (in MathPrint mode only).
In MathPrint mode, press $ between the entry of the
numerator and the denominator.
In Classic mode, press P between the entry of the
numerator and the denominator.
• @ enters a mixed number. Press @ between the entry
of the unit and the numerator, and press $ between the
entry of the numerator and the denominator.
• } n < simplifies a fraction by the factor n specified
The entry n must be a positive integer.
• } < automatically simplifies a fraction using the
lowest common prime factor. The factor displays.
Repeatedly press } < to simplify the fraction to its
lowest terms.
%O } %j
17