Shure TRACER 1 Quick Start Manual

l s nui l E
@
222 ARTFEY A VANSTON IL 6 0 2 0 A
I 1
1
AREA
CODE 31 21866 2200
CABLE
S H U R E M C R O
HIGH FIDELITY AUDIO PRODUCTS
TWx 910 231 0048 TELEX 72 4381
5
x
38p (
0002
x
001
5
In
)
Kepl,~c~ment Model
SPECIFICATIONS
20.000
2
dH at
1 5 2 0
1,000
Hz-33
cmlsec
Hz
1 HI grams grams 10,000
Hz-I9
rmlspr
a t
I gram
t o u t p u t voltages given for stereo cut record. for MONO cut record, output voltage at both left chan-
nel and right channel cartridge terminals will be 71% of figures above.
ttReplacement stylus provides upgraded performance.
'Do not exceed maximum indicated tip tracking force or total tone arm force.
"See section on tracking force.
Optimum Load: 47,000 ohms resistance in parallel with 200 to 300 picofarads capacitance per
channel. Load resistance can be up to 70,000 ohms with almost no audible change in frequency
response. Total capacitance includes both tone arm wiring and amplifier input circuit.
Net Weight: 6.4 grams
THlS CARTRIDGE INCLUDES THE SHURE EXCLUSIVE DYNAMIC STABILIZER
WITH THESE FEATURES.
Viscous-damping functions like a shock absorber to resist sudden changes in motion, enabling the
tone arm to follow the irregularities of a warped record surface. Record warps can cause sudden and
rapid changes in arm-to-record distance that produce drastic increases and decreases in tracking
force and tracking angle. The results can be signal wow, groove skipping, cartridge bottoming, or
even amplifier or speaker overload. The Dynamic Stabilizer remedies warp effects by maintaining a
constant distance from the arm to the record surface. The cartridge achieves its full potential
trackability despite warped records.
-
CONSTANT DlSTANCF
TURNTABLE OTHER CARTRIDGE TURNTABLE TRACER CARTRIDGE
Conductive fibers neutralize static charges on the record sur-
face and conduct them to ground. The fibers also sweep the
, - , , ,
record groove clean of dust and dirt in front of the stylus tip.
FIBWS
And the entire Stabilizer absorbs impact to prevent record or
stylus damage if the arm is accidentally dropped on a record.
1
RECORD
1
THlS CARTRIDGE FEATURES THE SHURE EXCLUSIVE HYPERELLIPTICAL
NUDE DIAMOND TIP.
Its optimized contact area is longer and narrower than the
traditional biradial (elliptical) tip-groove contact area.
This optimization results in dramatic reduction of both
harmonic distortion and intermodulation distortion.
VIEW IN DIRECTWC.
VIEW IN DlRECTlCN
'A"
Copyright
1982,
Shure Brothers
Inc
27A1787 (BG)
Printed in
U.S.A.