Related Manuals for Citaq S1 Series
Summary of Contents for Citaq S1 Series
- Page 1 CITAQ S1 CITAQ S1 Series POS Terminal Installation Manual Applicable models: S1A01, S1A02, S1A03, S1A01-X, S1A02-X, S1A03-X (“X” can be represented 1~9) Please read this manual carefully before installation...
- Page 2 2 months. If there is any problem during installation or any confusion about this manual, please send email to our customer support department: support@citaq.com There will be professional experts to help you! Or visit our website: www.citaq.com...
- Page 3 Kindly find below items when opening carton ITEM LIST Device 1 unit Thermal pape 1 roll Adaptor 1 pc Power core 1 pc Manual 1 pc Twisted ring 1 pc Desiccative 2 bags Remark Name Configuration Quad-Core Cortex-A17,up to 1.8GHz 32GB Android 10.0 Display...
- Page 4 Remark Name Configuration Printer 80mm Thermal printer PrintingSpeed MAX 20mm/s Printing Span 200km Sensor out of paper, cover open Cutting times 2 million times cutting way half cut/ full cut Power supply DC24V/2.5A input 5X USB 1X RS232 1X HDMI 1X LAN Ports 1X RJ11 for Cash drawer RJ45,10/100/100M...
-
Page 5: Installation Notes
Installation Notes Put the whole machine on a stable table afterunpacking. Installation Notes... - Page 6 Product Interface Install Paper...
- Page 7 Display Description Install the TF Card Step 1: Unscrew the metal cover Step2: Insert TF card to corresponding slot Step3: Install the metal cover...
-
Page 8: Wall Mounting Installation
Wall mounting Installation Step 1. A suitable flat wall should be required for installing fixture. Install the 4 screws(100x100mm) that fixing the bracket on the wall, and install the 4 screws(100x100mm) that embedding the equipment on the metal base board. Step 2 Put the equipment that installed with 4 Screws into the fixation block. - Page 9 Developer debug mode Enter Developer mode Turn on Settings，enter Abouttablet，Click Buildnumber for 7 times or more in a row until the "you are now a developer.”prompt pops up. At this point, the System page in Settings can see the Developeroptions option.
- Page 10 Turn on debug （1）Enter Developeroptions，Turn USBdebugging on。...
- Page 11 Enter Settings，Enter Display，Turn DEBUG on。 （2） Debug Connect the Device and computer with a double-ended USB-A cable. (Must be connected to the usb port closest to the headphone jack)
- Page 12 At this point, the adb command of the computer can already see the device and can be developed and debugged.。...
- Page 13 WiFi Step 1: Find and click the “Settings “on the desktop, as shown below: Step2: In the Settings menu, click “Network & internet”, as shown below:...
- Page 14 Step 3: In the Network & internet menu, click “WiFi”, as shown below: Step 4: After turning on the WiFi switch, find and click the WiFi signal that needs to be connected in the displayed signal list. As shown below:...
- Page 15 Step 5: Enter the WiFi password and click connect. As shown below: Step 6: After the connection is complete, find the wireless signal in the WiFi list, and it will display Connected. As shown below: Step 7: In the WiFi list, click the connected signal to...
- Page 16 delete and share it. As shown below: Bluetooth Step 1: Find and click the “Settings” on the desktop, as shown below:...
- Page 17 Step 2: In the Settings menu, click “Connected devices”, as shown below: Step 3: Click “Pair new device” to search for Bluetooth devices. As shown below: Step 4: Find and click the Bluetooth device to be...
- Page 18 connected in the displayed device list. As shown below: Step 5: In the confirmation box that pops up, click “Pair”. As shown below: Step 6: After the pairing is complete, you can see the Connected device in the list of connected devices. As...
- Page 19 shown below: Step 7: Click on the paired device to delete and disconnect it. As shown below:...
- Page 20 Daily Maintenance of the device 1. Keep the spaces clean 2. Kindly pull out the adaptor after using to lengthen the service life. 3. Routinely clean dusts of the device. Don't use liquid or spray cleaner. Wipe the touch screen and case by a soft cloth. And please avoid pouring liquid inside the machine which will bring damage of it.
- Page 21 Notice: Don't remove any label or attached stuffs on printer by knife or metal stuffs. Any hard meterials(such as bamboo stick or hard plastic) are not allowed for cleaning the printer. These will damage the thermal area and leads area and damage the printer as well.
- Page 22 with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.
- Page 23 CITAQ CO., LTD Tel: 86-754-88990429 Website: www.citaqpos.com Add: 9F&13/F, Chuangye Bldg, Keji Middle Road Hi-Tech Zone, Shantou, Guangdong, China 515000...
Need help?
Do you have a question about the S1 Series and is the answer not in the manual?
Questions and answers