Extension Cords; Unpacking And Cleaning; Operating Instructions - Delta 31-552 Instruction Manual

Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension cord which
has a 3-prong grounding type plug and matching receptacle which will accept the machine's plug. When using an
extension cord, be sure to use one heavy enough to carry the current of the machine. An undersized cord will cause
a drop in line voltage, resulting in loss of power and overheating. Fig. D, shows the correct gauge to use depending
on the cord length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere Total Length
Rating Volts of Cord in Feet
0-6 115 up to 25
0-6 115 25-50
0-6 115 50-100
0-6 115 100-150
6-10 115 up to 25
6-10 115 25-50
6-10 115 50-100
6-10 115 100-150
10-12 115 up to 25
10-12 115 25-50
10-12 115 50-100
10-12 115 100-150
12-16 115 up to 25
12-16 115 25-50
12-16 115
GREATER THAN 50 FEET NOT RECOMMENDED

OPERATING INSTRUCTIONS

FOREWORD
The Delta 6" Abrasive Belt Finishing Machine provides fine finishes fast. The 6" abrasive belt operates vertically,
horizontally or any angle in between. The support table on the 6" Abrasive Belt Finishing Machine tilts 45° out and 20°
in for bevel operations.
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.

EXTENSION CORDS

Gauge of
Extension Cord
18 AWG
16 AWG
16 AWG
14 AWG
18 AWG
16 AWG
14 AWG
12 AWG
16 AWG
16 AWG
14 AWG
12 AWG
14 AWG
12 AWG
Fig. D

UNPACKING AND CLEANING

MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating Volts
0-6 230
0-6 230
0-6 230
0-6 230
6-10 230
6-10 230
6-10 230
6-10 230
10-12 230
10-12 230
10-12 230
10-12 230
12-16 230
12-16 230
12-16 230
5
Total Length Gauge of
of Cord in Feet Extension Cord
up to 50 18 AWG
50-100 16 AWG
100-200 16 AWG
200-300 14 AWG
up to 50 18 AWG
50-100 16 AWG
100-200 14 AWG
200-300 12 AWG
up to 50 16 AWG
50-100 16 AWG
100-200 14 AWG
200-300 12 AWG
up to 50 14 AWG
50-100 12 AWG
GREATER THAN 100 FEET NOT RECOMMENDED
Fig. D