Related Manuals for HAMOKI FT-818
Summary of Contents for HAMOKI FT-818
- Page 1 Electric Griddle Instruction Manual Model: FT-818/FT-820 Please read this instruction manual carefully before operation...
-
Page 2: Safety Tips
Safety Tips This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and applicable safety regulations. - Page 3 Follow the safety instructions listed in order to avoid any hazards. The housing and the grill plates of the appliance will get hot during operation. Do not ▪ touch them with bare hands. Always use the operating handle in order to open the device.
-
Page 4: Electrical Grounding Instructions
Make sure that the voltage of local power supply matches that of the naming plate. Behind the housing, there is a copper-material equipotential terminal. The cross section area of the connecting wire should not be lower than 1.5mm2 . MODEL VOLTAGE POWER DIMENSIONS FT-818 220-240V 400x500x285 FT-820 220-240V 4.4KW 730x500x230 Installation and connection The installation of the unit must be performed by a qualified technician only. -
Page 5: Waste Disposal
Waste disposal DISCARDING THE DEVICE At the end of its service life the device has to be disposed in accordance with the national regulations. It is advisable to contact a company which specialises in waste disposal, or just contact the local disposal service in your community. WARNING! To avoid any hazards, make the device unfit for use before disposal. -
Page 6: Warranty Claims
Hamoki Ltd and upon proper installation and start-up in accordance with the instruction packet supplied with each unit) a one year parts warranty. Hamoki Ltd’s obligation under this warranty is limited to a period of one (1) year from the date of original installation. WARRANTY CLAIMS: All claims for parts must be made directly through the retailer in the first instance.
Need help?
Do you have a question about the FT-818 and is the answer not in the manual?
Questions and answers