Summary of Contents for HAMOKI GR-1000
- Page 1 Flat Electric Chrome Griddle (Countertop) GR-1000 INSTRUCTION MANUAL Read this manual carefully prior to use. Technology is subject to change without notice.
-
Page 2: Main Technical Parameters
MAIN TECHNICAL PARAMETERS CODE 291010 Model GR-1000 Finish Chrome-plated, 16 mm thick Dimensions 1000 x 520 x 305 mm Plate Size 996 x 398 mm Temperature 50-300°C Weight 66 KG Power 3 + 3 kW (3 pin plugs fitted) Rated Input... -
Page 3: Safety Precautions And Warnings
SAFETY PRECAUTIONS AND WARNINGS READ THIS INSTRUCTION MANUAL BEFORE USING THIS DEVICE AND KEEP DOCUMENT AVAILABLE AT ALL TIMES. All the information and instructions in this manual consider standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. -
Page 4: Transportation And Storage
10. The power supply voltage used by the device must match the voltage on the product nameplate. Voltage fluctuations is allowed in range of +5%-10%. Ignoring this, this fryer will not work properly. 11. The power plug should be in good contact when plugged into the socket. The middle pole of the three plugs must be well grounded, otherwise it may cause an electric shock. -
Page 5: Installation Instructions
INSTALLATION INSTRUCTIONS 1. Before use, ensure the electric griddle’s operating voltage matches the supplied voltage before installation. 2. Place the unit on a stable, level surface or stand designed to hold its weight. Ensure the surface is non-combustible, such as stainless steel or heat-resistant material. Do not place flammable items, such as towels or clothing, on top of the griddle. -
Page 6: Cleaning And Maintenance
3. Remove Cooked Food Once the food is fully cooked, turn off the power switch. Remove food with a wooden clip or bamboo clip. Avoid using metal sharp tools to roll or take-out food and scratch the surface of griddle plate. If you are cooking multiple food, place the next food on the griddle surface and repeat the process. -
Page 7: Daily Checks
away from humidity or direct sunlight to prevent rust and deterioration of electrical components. Do not stack heavy objects on top of the griddle. NOTICE! • DO NOT attempt to replace any parts yourself. All repairs or servicing must be carried out by a qualified technician. -
Page 8: Troubleshooting
Remove and thoroughly clean the grease trough or tray. Ensure it is dry before reinserting. Check for any signs of wear or damage to the knobs, power cord or heating elements after each use. Inspect the chrome surface for any scratches, discoloration, or residue build-up. - Page 9 - Inspect and replace the - Heating element issue heating element if it is not functioning correctly. - Grease tray not - Empty the grease tray emptied regularly during use. - Ensure the grease trough is - Grease trough properly installed and aligned Grease overflowing misaligned with the drain.
- Page 10 3. Recycling Many components of the unit, such as metal parts, wiring, and certain electronic components, can be recycled. Contact a certified e-waste recycling centre or your local waste management facility to ensure the unit is properly dismantled and recycled. 4.
-
Page 11: Warranty Claims
Hamoki Ltd.’s obligation under this warranty is limited to a period of one (1) year from the date of original installation. The warranty is applicable to parts only and does not cover labour or servicing costs associated with the replacement or repair of defective parts. - Page 12 Hamoki Limited www.Hamoki.co.uk...
Need help?
Do you have a question about the GR-1000 and is the answer not in the manual?
Questions and answers