Removing The Third Row Solid Bench Seat - Chevrolet VENTURE 1998 Manual

1. Pull the nylon strap
on
the back of the seat to fold
Removing the Third Row Solid Bench Seat
There are two levers to adjust the seat forward or
rearward. They are below the center position of the
bench, one in front and one in back
of
the seat.
Lift up either lever and slide the seat forward to allow
for extra storage behind the seat, or slide the seat back to
allow extra room for third row passengers. Release the
lever. Push and pull on the seat to be sure it is locked
into place.
the seatback forward.
2. Slide the seat all the way back by either lifting the
front adjuster bar and pushing back, or by lifting the
handle on the back of the seat and pulling the seat
towards the rear of the vehicle.
3. From behind the bench seat, pull the nylon straps at
the base of the seat to release the rear latches from
the floor pins.
1-14