Chevrolet SUBURBAN 1994 Manual page 299

3. Pull the bulb
straight out of the
socket.
4. Put a new bulb
into the socket
and push it in
until it is tight.
5.
Put the socket back into the side marker assembly and turn it to the
right to tighten it.
6 . Replace the parking/turn signal light assembly and tighten the screws.
Roof Marker Lights
1. Remove the
screws and lift off
the lens.
2. Pull the bulb
straight out of the
socket.
3. Put a new bulb into the socket and push it in until it is tight.
4. Replace the lens and tighten the screws.
6-54