Setting The Clock - Chevrolet CORVETTE COUPE - NAVIGATION SYSTEM 2010 Owner's Manual

8 Infotainment System

Setting the Clock

To set the time:
1. Press the power/volume knob to
turn the system on.
2. Press and hold the time display
in the upper right corner of any
screen.
3. Select the 12H or 24H screen
button to display the time in
standard or military time.
4. Press and hold the Hour and
Min. (minute) arrow buttons
to increase or to decrease
the time.
5. Select the correct time zone
screen button.
6. Select the Daylight Saving Time
screen button, if necessary.
The radio uses the GPS satellite to
set the time. The vehicle needs
to be in an open area to receive the
signal. See "Clock" under AM-FM
Radio on page 13 for more
information.
Setting the Region, Entering
an Address and Point of
Interest, and Storing a Home
Destination and Preset
Destinations
Before entering an Address,
Point of Interest, Home, or Preset
Destination, select the correct region
that contains the final destination.
The vehicle must be stopped to do
this operation.
Setting the Region
To set the region:
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the power/volume knob to
turn the system on.
3. Insert the DVD map disc. See
"Installing the Map DVD" under
Maps on page 66 for more
information.
4. A notice may appear. Touch the
Agree screen button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
<
7. Press the Enter Destination
screen button.
8. Press the Region screen button.
9. Select the correct numbered
region screen button that
contains your final destination.
The system returns to the Enter
Destination menu. See Enter
Destination on page 32 for more
information.
Entering an Address
To set a destination by entering a
street address:
1. If the radio is already on with a
map disc inserted, skip to Step 5.
2. Press the power/volume knob to
turn the system on.
3. Insert the DVD map disc. See
"Installing the Map DVD" under
Maps on page 66 for more
information.
4. A notice may appear. Touch the
Agree screen button to proceed.