Download Print this page

ABS ABT-12CB Owner's Instructions Manual

Standard chromatography refrigerators

Advertisement

Quick Links

Part number 20082, Rev 0
STANDARD CHROMATOGRAPHY REFRIGERATORS
ABT-12CB, ABT-19CB, ABT-23CB, ABT-26CB, ABT-33CB,
ABT-35CB, ABT-37CB, ABT-41CB, ABT-45CB, ABT-47CB,
ABT-49CB, ABT-69CB, ABT-72CB, ABT-30RC
This manual describes how to operate and care for your appliance to get the best, most efficient, performance.
Note to Customer:
This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its
safe delivery was assumed by the carrier upon acceptance of the shipment. As directed on the side of your
packing carton, claims for loss or damage sustained in transit must be made on the carrier as follows:
A.) Visible Loss, Damage, Shortage External Evidence of Loss or Damage: This type of damage must be noted on
the freight bill and acknowledged by the carrier's agent (driver) at time of delivery. Make sure you get a signed
copy. Send a written request for an inspection to the carrier.
B.) Concealed Damage: This type of damage may not be discovered until the unit is being unpacked. When
concealed damage is discovered, stop unpacking immediately and contact the carrier immediately to report
the claim and request an inspection. This should be done as soon as possible and, in any case, must be done
within 15 days or receiving the merchandise. If at all possible, do not move the item and save all packaging
material for carrier's inspection.
C.) FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN THE CARRIER REFUSING TO HONOR YOUR
COMPANY'S CLAIM. UNDER NO CIRCUMSTANCES SHOULD THE MERCHANDISE BE RETURNED TO THE
MANUFACTURER. NO RETURNS WILL BE ACCEPTED WITHOUT PRIOR AUTHORIZATION.
Horizon Scientific
125 Varnfield Drive
Summerville, SC 29483
Phone: 800-648-4041
Fax:
843-821-8051
OWNER'S INSTRUCTIONS
READ THIS BOOK!
Warranty:
Two-Year Parts and Labor
5 Years Compressor Parts
1
Revision Date
08/30/2012

Advertisement

loading
Need help?

Need help?

Do you have a question about the ABT-12CB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ABS ABT-12CB

  • Page 1 Part number 20082, Rev 0 STANDARD CHROMATOGRAPHY REFRIGERATORS ABT-12CB, ABT-19CB, ABT-23CB, ABT-26CB, ABT-33CB, ABT-35CB, ABT-37CB, ABT-41CB, ABT-45CB, ABT-47CB, ABT-49CB, ABT-69CB, ABT-72CB, ABT-30RC OWNER’S INSTRUCTIONS This manual describes how to operate and care for your appliance to get the best, most efficient, performance.
  • Page 2: Table Of Contents

    Part number 20082, Rev 0 Table of Contents RECEIVING ......................3 INSTALLATION INSTRUCTION ................. 4 REFRIGERATOR OPERATION ................... 8 QUICK TROUBLESHOOTING GUIDE ................ 9 MAINTENANCE AND CLEANING ................11 PRODUCT WARRANTY ..................13 BEFORE CALLING THE MANUFACTURER’S TECHNICAL SERVICE DEPARTMENT, please have the unit’s model and serial number ready as well as the problem description.
  • Page 3: Receiving

    Part number 20082, Rev 0 RECEIVING Your unit was built, packaged, and inspected with extreme care. We shipped it to you using carriers we trust with a proven track record of careful handling, good customer service, and on time delivery. Unfortunately, regardless of all of these efforts sometimes accidents happen and occasionally those accidents result in shipping damage.
  • Page 4: Installation Instruction

    Part number 20082, Rev 0 INSTALLATION INSTRUCTION REQUIRED TOOLS – 9/16” socket or wrench, ¾” open end wrench, Phillips head screwdriver, and level. UNCRATING – Move your refrigerator as close to the final location as possible before removing the wooden skid.
  • Page 5 Part number 20082, Rev 0 For Sliding Doors Model(s) Remove the styrofoam blocks on the top of the door tracks (see Image 3) and the plastic door stoppers (see Image 4, 5, and 6) CASTER INSTALLATION (not applicable to ABT-30RC) It is important to ensure the casters are installed properly and securely tightened in order to provide the maximum strength and stability to the unit.
  • Page 6 Part number 20082, Rev 0 LEVELING – Proper leveling of your refrigerator is critical to operating success. Condensate removal and door operation will be adversely affected by not leveling. The unit should be leveled front to back and side to side with a level. Ensure that the drain hose or hoses are positioned in the pan.
  • Page 7: Temperature Control

    Part number 20082, Rev 0 SHELF INSTALLATON Hook shelf clip onto pilaster strips (See below). Position all four shelf clips equal in distance from the floor for flat shelves. Wire shelves are oriented so that cross support bars are facing down.
  • Page 8: Refrigerator Operation

    Part number 20082, Rev 0 REFRIGERATOR OPERATION After the unit is properly installed and power is applied, it will take some time before the system is cooled down to temperature and cycling normally. You should wait 8 hours on the first startup before beginning to add product to the unit.
  • Page 9: Quick Troubleshooting Guide

    Part number 20082, Rev 0 QUICK TROUBLESHOOTING GUIDE Check these items before calling for service PROBLEM: POSSIBLE CAUSE / SOULTIONS: • Electrical circuit is not 110-120V 60Hz. • The power cord is not plugged in. • No power at electrical outlet. Check to make sure Unit does not run breaker is not tripped or fuse is not blown.
  • Page 10 Part number 20082, Rev 0 PROBLEM: POSSIBLE CAUSE / SOULTIONS: • Compressor may be overheated. Please check the room Compressor noises temp and ensure the range is within 65°F to 85°F. If the problem still exists, call for service. • Door gasket is not sealing properly. Check for debris, cracks, and items passing through door at the gasket.
  • Page 11: Maintenance And Cleaning

    Part number 20082, Rev 0 MAINTENANCE AND CLEANING CLEANING PART CLEANING AGENTS TIPS AND PRECAUTIONS Interior and Door Soap and water Use 2 tablespoons of baking soda in 1 quart of Liners Baking soda and water warm water Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical parts.
  • Page 12 Part number 20082, Rev 0 CONDENSER MAINTENANCE (not applicable to ABT-30RC) IMPORTANT WARRANTY INFORMATION • Air is pulled through the condenser continuously during operation. Along with this air come impurities like dust, lint, grease, etc. • These impurities accumulate in the condenser. Dirty condensers result in inefficient operation, compressor failure and potential product loss which are not covered by warranty.
  • Page 13: Product Warranty

    Part number 20082, Rev 0 HORIZON SCIENTIFIC, INC. PRODUCT WARRANTY Horizon Scientific, Inc. warrants to the original purchaser every new Horizon Scientific, Inc. refrigerated unit, the cabinet and all parts thereof, to be free from defects in material or workmanship, when such unit is installed, used, and maintained in accordance with provided instructions, for a period of two (2) years.
  • Page 14 Part number 20082, Rev 0 WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose.