Insignia IS-HDPLTV42 User Manual page 11

Button
3 SAT
4 TV2
5 S.Mode
6 SAP
7 CCD
8 P.mode
9 CH +
10 VOL –
11 Mute
12 Number
buttons
13 Recall
10
Description
Press to program the remote to control your
satellite set-top box. After programming, press
to control the satellite set-top box. For
information on programming the remote, see
"Setting up the remote to control other
devices" on page 17.
Press to program the remote to control your
second TV. After programming, press to
control the second TV. For information on
programming the remote, see "Setting up the
remote to control other devices" on page 17.
Press to select the audio source. You can
select:
• Speech
• User (this option uses changes you have
made to settings in the OSD)
• Music
• Standard
Press to select the audio mode. You can
select Mono, Stereo, or SAP (second audio
program).
Press to cycle through the closed caption
options, including:
CC1, CC2, CC3, CC4, TEXT1, TEXT2,
TEXT3, TEXT4, XDS, and CCD OFF.
Selects the picture mode. You can select
Bright, Standard, Soft, or User (this option
uses settings you have set in the OSD)
Press to scroll up through the available
channels.
Press to decrease the volume.
Press to mute the sound. Press again to
unmute the sound.
Press one or more number buttons to enter a
channel number directly.
Press to switch to the last channel you
viewed.
www.insignia-products.com
IS-HDPLTV42 42-inch HDTV