flexi SK-LCD button Brief User's Manual

Alarm system ARM:
1. Make sure all zones are not violated.
2. Press the [ ] button.
3. Enter User code.
4. Select the button of area to be activated.
5. Press [ ] button.
6. Exit the premises within time delayed.
When the system is armed, the
up.
Alarm system DISARM:
1. Enter User code.
2. Press the button of particular area you wish to
disarm.
3. Press [ ] button.
When the alarm is disarmed the
illuminated.
For area status changing into the opposite one it is sufficient to enter User code and select the preferred area. To
delete symbols or command entered, press button [
FLEXi
Keypad SK-LCD button – Brief User Guide
Keypad overview
Alarm system arming / disarming
SLEEP mode activation:
(Premises perimeter is secured. Movement inside is allowed. If
you open the entrance door, the alarm will actuate
immediately):
1. Press [ ] button.
2. Enter User code.
3. Press the button of area to be activated.
4. Press [
icon will light
5. SLEEP mode will turn on immediately, without exit delay.
The
STAY mode activation:
(Premises perimeter is secured. Movement inside is allowed.
Any opening of entrance door enables time delay during which
you have to disarm the alarm):
1. Press [ ] button.
2. Enter User code.
icon must be
3. Press the button of area to be activated.
4. Press [
5. STAY mode will turn on immediately, without exit delay.
The
].
] button.
icon will illuminate when SLEEP mode is on.
] button.
icon will illuminate when STAY mode is on.