flexi SK-LED button Brief User's Manual

Alarm system ARM:
1. Make sure all zones are not violated (none of
zone indicators are illuminated).
2. Press the [ ] button.
3. Enter User code.
4. Select the button of area to be activated.
5. Press [ ] button.
6. Exit the premises within time delayed.
Once the code is entered the
for duration of exit time delay. When the system is
armed, the indicator will light up.
Alarm system DISARM:
1. Enter User code.
2. Press the button of particular area you wish to
disarm.
3. Press [ ] button.
When the alarm is disarmed the
be illuminated.
For area status changing into the opposite one it is sufficient to enter User code and select the preferred area. To
delete symbols or command entered, press button [
FLEXi
Keypad SK-LED button – Brief User Guide
Keypad overview
Alarm system arming / disarming
SLEEP mode activation:
(Premises perimeter is secured. Movement inside is allowed. If
you open the entrance door, the alarm will actuate
immediately):
1. Press [ ] button.
2. Enter User code.
3. Press the button of area to be activated.
4. Press [
5. SLEEP mode will turn on immediately, without exit delay.
indicator will flash
The
STAY mode activation:
(Premises perimeter is secured. Movement inside is allowed.
Any opening of entrance door enables time delay during which
you have to disarm the alarm):
1. Press [ ] button.
2. Enter User code.
indicator must
3. Press the button of area to be activated.
4. Press [
5. STAY mode will turn on immediately, without exit delay.
The
].
] button.
indicator will illuminate when SLEEP mode is on.
] button.
indicator will illuminate when STAY mode is on.