Advertisement

Quick Links

DXPW140E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DXPW140E and is the answer not in the manual?

Questions and answers

Summary of Contents for DeWalt DXPW140E

  • Page 1 DXPW140E...
  • Page 2: Definitions: Safety Guidelines

    English (original instructions) PRESSURE WASHER DXPW140E Definitions: Safety Guidelines 9 . Do not touch plug or outlet with wet hands. 10 . Avoid accidental starts. Move switch on unit to OFF position The definitions below describe the level of severity for each before connecting or disconnecting cord to electrical outlets.
  • Page 3: Power Supply And Electrical Info

    IEC 60364. Technical Data WARNING: The appliance may only be connected to an alternating current. The voltage must correspond with the DXPW140E type plate of the appliance. Operating Pressure 10 MPa (1450 psi) WARNING: For safety reasons, we recommend that you...
  • Page 4: Assemble Main Unit

    Assemble Main Unit NOTICE Depending on the model, the model may be different than shown in the illustrations in these instructions. 1. Wheels 2. Spray gun lower bracket 3. Bumper handle 4. Spray gun upper bracket 5. Spray gun holster 6.
  • Page 5 Assemble Main Unit Click Click...
  • Page 6 Assemble Main Unit Click...
  • Page 7 Fig. A not included...
  • Page 8 Fig. B Click Click Click Fig. C Fig. C-1 Fig. C-2 Fig. D...
  • Page 9: Description (Fig. A)

    OPERATION Description (Fig. A) Instructions for Use WARNING: Never modify the pressure washer or any part WARNING: Always observe the safety instructions and of it. Damage or personal injury could result. applicable regulations. Handle assembly Pressure Adjustments Power cord / Nozzle holder Foam system The pressure setting is pre-set at the factory to achieve optimum pressure and cleaning.
  • Page 10: Shutting Down

    WARNING: Flying object could cause risk of serious injury. which could result in amputation or other serious Ensure nozzle is completely inserted in quick-connect injury. Leaks caused by loose fittings or worn or socket and quick-connect collar is fully engaged (forward) damaged hoses can result in injection injuries.
  • Page 11: O-Ring Maintenance

    NOTICE: Risk of property damage. Never turn water to o-rings prior to assembling high-pressure hose (pump supply off while pressure washer is running or damage to end) , high-pressure hose (gun end) , garden hose to the pump will result. pump , and plastic wand (gun end). Purchase an O-Ring Maintenance Kit by contacting 2.
  • Page 12: Protecting The Environment

    ACCESSORIES PSI: Pounds per Square Inch. The unit of measure for water pressure. Also used for air pressure, hydraulic pressure, etc. WARNING: Since accessories, other than those offered kPa (kilopascal): Metric pressure measurement. 1 kilopascal by D WALT, have not been tested with this product, use equal 1000 pascals.
  • Page 13 Limited Warranty The benefits provided by this Limited Warranty are in addition to other rights and remedies of the consumer at law in relation to the goods or services to which this Limited Warranty relates. Our products come with guarantees that cannot be excluded under either: 1) The Consumer Guarantees Act;...
  • Page 14: Troubleshooting Guide

    Troubleshooting Guide This section provides a list of the more frequently encountered malfunctions, their causes and corrective actions. The operator or maintenance personnel can perform some corrective actions, and others may require the assistance of an authorised technician. TROUBLESHOOTING CODES PROBLEM CODE POSSIBLE CAUSE POSSIBLE SOLUTION...
  • Page 16 FNA Group, Inc. 7152 99th Street, Pleasant Prairie WI 53158 The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the "D" shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.

Table of Contents