Contents Safety information ..................iv General Safety guidelines ....................iv Chapter 1. Getting started ................1-1 Shipping contents ......................1-1 Notice for use ......................1-1 Product overview ......................1-2 Setting up your monitor ....................1-4 Chapter 2. Adjusting and using your monitor ..........2-1 Comfort and accessibility.....................
Page 4
Appendix A. Service and Support.............. A-1 Registering your option ....................A-1 Online technical support..................... A-1 Telephone technical support ..................A-1 Appendix B. Notices..................B-1 Recycling information ....................B-2 Trademarks........................B-3 Power cords and power adapters ................B-3...
Safety information General Safety guidelines For tips to help you use your computer safely, go to: http:// www.lenovo.com/safety Before installing this product, read the Safety Information. DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached.
Chapter 1. Getting started This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please see the Setup Poster for brief information. R34w-30 supports Lenovo Accessories and Display Manager* - Artery. *Formerly Lenovo Display Control Center. Shipping contents The product package should include the following items: ■...
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.
Monitor controls The keypad controls on the bottom are accesses to various functions. For information on how to utilize these keypad controls, please see “Adjusting your monitor image” on page 2-3. Cable lock slot Your monitor is equipped with a cable lock slot located under the rear of your monitor. 1-3 R34w-30 Curved Panel Monitor User’s Guide...
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety information on page iv before carrying out this procedure. 1. Power off your computer and all attached devices, and unplug the computer power cord.
Page 10
3. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor. Lenovo recommends that customers who require to use the Display Port input on their monitor purchase the "Lenovo Display Port t o Display Port cable...
Page 11
5. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from Display Port, or HDMI. Note: The audio output in HDMI/DP modes. 6. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment.
Page 12
8. Power on the monitor and the computer. 9. When you install the monitor driver, download the driver that corresponds to your monitor model from the Lenovo website http://pcsupport.lenovo.com/solutions/ R34w_30. Refer to the "Manually installing the monitor driver"on page 3-5 section to install the driver.
Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/. Arranging your work area Use a work surface of appropriate height and available working area to allow you to work in comfort.
The following are some other tips for comfortable viewing of your monitor: • Use adequate lighting for the type of work you are performing. • Use the monitor brightness, contrast, and image adjustment controls, if equipped, to optimize the image on your screen to meet your visual preferences. •...
Adjusting your monitor image This section describes the user control features used to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Control Description Icon Power Press to turn On the monitor /...
Using the On-Screen Display(OSD) controls To adjust the settings, the user controls can be viewed through the OSD. R34w-30 Level 2 Input: DP Resolution: 3440 * 1440 Refresh Rate: 60Hz 1. Use to move among the icons. Select an icon and press to access that then function.
Page 17
Table 2-1. OSD functions Controls and OSD Icon on Sub menu Description Main Menu Adjustments Standard All input ports FPS1 FPS2 Racing Game Mode Game1 Game2 Game Settings Level1 Level2 Over Drive Level3 Level4 MPRT On/Off Auto (AMD FreeSync Premium)/ AdaptiveSync Only DP port Off/Left Top/Right Top/ Left Bottom/...
Page 18
OSD Icon on Controls and Sub menu Description Adjustments Main Menu Auto Switch Input All input ports Input Signal Port HDMI1 Settings HDMI2 DP Select DP1.2 / DP1.4 Only DP port On/Off Only HDMI port Model All input ports Firmware Serial Number Information Mode...
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes.This is normal and the image can be re-adjusted using automatic image setup and the image controls.
Understanding power management Power management is invoked when the computer recognizes that you have not using your mouse or keyboard for a user-definable period. There are several states as described in the table below. For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.
Wall Mounting (Optional) Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem...
Page 25
Problem Possible cause Suggested action Reference One or more of This is a characteristic If there are more than "Appendix A, the pixels of the LCD technology five pixels missing, Service and appear and is not an LCD contact Support Support"...
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows operating system. 4. From the Lenovo website https://pcsupport.lenovo.com/solutions/r34w_30, find the corresponding monitor driver and download it to a PC to which this monitor is connected (such as a desktop).
Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkCentre ThinkPad ThinkVision Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies. Other company, product, or service names may be trademarks or service marks of others.
Need help?
Do you have a question about the Legion R34w-30 and is the answer not in the manual?
Questions and answers