Moreover, CASIO Computer Co., Ltd. shall not be liable for any claim of any kind whatsoever by any other party arising out of the use of this product and the items that come with it.
Introduction The OS Update application updates the operating system of CASIO Graphic Scientific Calculator. System Requirements The minimum computer system requirements for running the OS Update application are shown below. Check to make sure that your computer complies with these requirements before installing the application on it.
• Make sure there is no other CASIO device besides the calculator whose OS you are about to update connected to the computer. If there is, disconnect the other device.
Page 5
• This displays the “Select Connection Mode” dialog on the calculator. * Use of a genuine CASIO USB cable is recommended. If you plan to use a commercially available USB cable, be sure to use a cable that can transfer data.
Page 6
• When the update is complete, the dialog shown below will appear on the computer. • At this time, the calculator will automatically restart. • After the calculator starts up, configure all the settings that appear sequentially on the screen. For more information, see step 4 onwards under “Before Using the Calculator for the First Time”...
What to Do If the Update Failed The message below will appear if the calculator’s system memory becomes corrupted. Leave the message on the display and perform the procedure below. 1. Use the USB cable to connect the calculator to your computer. 2.
Need help?
Do you have a question about the fx-CG100 and is the answer not in the manual?
Questions and answers