Table of Contents
Advertisement
ENGLISH
Troubleshooting
If a problem should arise, first check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the Operating Instructions?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
Disconnect the power immediately and contact your store of purchase.
Symptom
No sound is produced.
No image appears on
the monitor.
Does not operate
properly when a device
equipped with a dock
control terminal is
connected
Remote control unit
does not operate
properly when a device
equipped with a
SYSTEM CONNECTOR
terminal is connected.
Cause
• The iPod is not playing.
• The iPod is not properly connected to the ASD-1R.
• The AC adapter is not connected to the ASD-1R or a
power outlet.
• The AV/Control cable is not properly connected.
• The monitor's input selection is not properly set.
• The ASD-1R's communications mode is not properly set.
• The ASD-1R's communications mode is not properly set.
• The communications mode is not suited for the AV/Control
cable connection.
• The system remote control unit's function selector is not
properly set.
• You are using a cable other than the included system
cable.
• Check that the iPod is playing.
• Check that the iPod is properly connected to the ASD-1R's
dock connector.
• Check the connections.
• Check the connections.
• Set the monitor's input selector to the proper position for
the connected video input terminal.
• Check that the communications mode is set to "DOCK
CONTROL". (Turn the power off when changing the
setting.)
• Check that the communications mode is set to "TAPE" or
"CD-R". (Turn the power off when changing the setting.)
• Set the communications mode to match the AV/Control
cable setting.
• Match the communications mode and system remote
control unit function.
• Use the included system cable.
8
ENGLISH
Measures
Page
–
4, 5
4, 5
4, 5
–
4
5
5, 6
6
6
Advertisement
Table of Contents
