Plantronics CALISTO P830-M Quick Setup Manual

Calisto P830 Quick Setup Guide
® ™
Welcome:
Using a Plantronics Calisto speakerphone
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone and
speaker.

Calisto P830 Key Features:


Seamlessly switches between calls
from PC, mobile and home landline

Color display and touch sensitive keys
for intuitive visual call management

Full duplex wideband audio support
and advanced noise cancellation

User friendly Caller ID and call log
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Calisto and P830 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other countries.
Published 10.11

Getting started:

Follow the steps below to get call answer/end controls
with your Calisto speakerphone and Cisco® Unified
Personal Communicator.
1. Connect your speakerphone to the computer. If
this is the first time you are connecting, wait for
the installation process to complete.
2. To get call control features, please download the
latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco Unified Personal Communicator to
always route call audio to the speakerphone:
3. Click File in the upper left corner of the Cisco
Unified Personal Communicator main screen.
4. Select Options. Then select Audio.
5. Select your Plantronics speakerphone as the
default device for Microphone and Speakers
option.
6. Now you can select which device plays your
incoming call alerts by selecting and option for
Ringtone. These sounds typically route through
your PC speakers, but can come through your
Plantronics speakerphone if you prefer.
7. In this screen you can also adjust Speakers and
Ringtone volume levels.
8. When you are finished adjusting volume levels,
click OK.
Note: USB configuration settings are unique for each USB
port. If you connect the speakerphone to a different port
you will need to make these changes again to set behavior
for that USB port.
3
4
4
8
5
5
6