Motorola ASTRO XTS 2500 1.5 Quick Reference Card

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

ASTRO

XTS™ 2500 / XTS™ 2500

Digital Portable Radio, Model 1.5

Quick Reference Card

Product Safety and RF Exposure Compliance

Before using this product, read the operating instructions

for safe usage contained in the Product Safety and RF

Exposure booklet enclosed with your radio.

ATTENTION!

This radio is restricted to occupational use only to satisfy

FCC RF energy exposure requirements. Before using this

product, read the RF energy awareness information and

operating instructions in the Product Safety and RF

Exposure booklet enclosed with your radio (Motorola

Publication part number 6881095C98) to ensure

compliance with RF energy exposure limits.

3-Position

Rotary Switch

_ _ _ _ _ _

On/Off/

Volume Knob

Top Side

Button

_ _ _ _ _ _ _

PTT Button

Side Button 1

_ _ _ _ _ _ _

Side Button 2

_ _ _ _ _ _ _

Write your radio's programmed features on the

dashed lines.

Radio On/Off

On - On/Off/Volume knob clockwise.

Off - On/Off/Volume knob counterclockwise.

Zones/Channels

Zone - Move Zone switch to desired zone.

Channel - Turn Channel Selector knob to

desired channel.

Receive/Transmit

Radio on and select zone/channel.

Channel

Select Knob

Listen for a transmission.

Top Button

_ _ _ _ _ _ _

Press and hold Volume Set button. Release

Volume Set button.

Speaker/Mic

Press Monitor button and listen for activity.

Adjust volume, if necessary.

Display

Press and hold PTT to transmit; release to

listen.

Send an Emergency Alarm

Radio on and press Emergency button. You

see red LED; you hear short, medium-pitched

tone.

Display shows

EMERGENCY

When acknowledgment is received, you hear

four tones; alarm ends; radio exits

emergency.

Send a Silent Emergency Alarm

Radio on and press Emergency button. You

see no LED; you hear no tone.

Press PTT.

Alarm continues until you exit by:

• Press and hold Emergency button for one

second

• Press and release PTT.

Send an Emergency Call

Radio on and press Emergency button. A

short, medium-pitched tone sounds.

Press and hold PTT. Announce your

emergency into the microphone.

Release PTT to end call.

Press and hold Emergency button for one

second to exit.

Table of Contents

Need help?

Do you have a question about the ASTRO XTS 2500 1.5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Motorola ASTRO XTS 2500 1.5

Page 1 RF energy awareness information and desired channel. operating instructions in the Product Safety and RF Send a Silent Emergency Alarm Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure Receive/Transmit Radio on and press Emergency button. You compliance with RF energy exposure limits.
Page 2 Answer a Phone Call Display Status Symbols Call Received. Receiving an individual Phone-like ringing, LED blinks GREEN, call PHONE CALL and m are displayed. Press Call Response button. View Mode. The radio is in the view mode Press PTT button to talk; release to listen. Press Call Response button again to hang Received Signal Strength Indication (RSSI).
Page 3 ASTRO ® 2500 & XTS 2500I Model 1.5 User Guide...
Page 4 U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. P25 radios contain technology patented by Digital Voice Systems, Inc. © Motorola, Inc. 2007. All Rights Reserved. Printed in the U.S.A. 07/07 . Motorola, Inc. 8000 W. Sunrise Blvd.
Page 5: Declaration Of Conformity
This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1-888-567-7347 Hereby declares that the product:...
Page 6: Computer Software Copyrights
Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Documentation Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola.
Page 7 Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.
Page 8: Table Of Contents
Contents Declaration of Conformity ..............ii Product Safety and RF Exposure Compliance .........iii Computer Software Copyrights ............iii Documentation Copyrights ..............iii Disclaimer ..................iv General Radio Operation ..........1 Notations Used in This Manual ............1 XTS 2500 / XTS 2500I Model 1.5 Radio ........... 2 Physical Features of the XTS 2500 / XTS 2500I Model 1.5 Radio ...
Page 9 Contents Conventional Squelch Options ............23 Analog Squelch .................23 PL Defeat ..................24 Time-out Timer ................24 Emergency ..................25 Send an Emergency Alarm ............25 Send a Silent Emergency Alarm ..........27 Send an Emergency Call ............27 Emergency Keep-Alive .............29 Scan ....................30 Turn Scan On and Off ...............30 View a Scan List ...............30 Scan List Empty ................30 Delete a Nuisance Channel ............31...
Page 10 Contents Battery Life ................41 Charging the Battery ..............41 Battery Recycling and Disposal ............43 Antenna ................... 44 Radio Operating Frequencies ........... 44 Accessories ..............47 Antennas ..................47 Batteries ..................48 Carry Accessories ................48 Belt Clips .................. 48 Body-Worn ................
Page 11 Contents Notes viii...
Page 12: General Radio Operation
General Radio Operation Notations Used in This Manual You will notice the use of WARNING, CAUTION, and Note throughout this manual. These notations are used to emphasize that safety haz- ards exist and that care must be taken or observed. An operational procedure, practice, condition, etc.
Page 13 General Radio Operation XTS 2500 / XTS 2500 Model 1.5 Radio...
Page 14: Xts 2500 / Xts 2500I Model 1.5 Radio
General Radio Operation Physical Features of the XTS 2500 / XTS 2500 Model 1.5 Radio Item Page Item Page Antenna On/Off/Volume Control Knob Top Button Microphone (programmable) Light Emitting Diode 10 Top Side (Select) (LED) Button (programmable) Speaker 11 Push-to-Talk (PTT) Button Universal Connector 12 Side Button 1...
Page 15: Physical Features Of The Xts 2500 / Xts 2500I Model 1.5 Radio
General Radio Operation Programmable Features The programmable controls on your radio can be programmed by a qualified technician to operate certain software-activated features. The features that can be assigned to these controls, and the page numbers where these features can be found, are listed below. Table 1: Programmable Features Feature Page...
Page 16: Display
General Radio Operation Display This figure is typical of what you see on your radio. The 64 x 96 pixel liquid crystal display (LCD) shows radio status, text, and menu entries. Backlight If poor light conditions make the display difficult to read, turn on the radio’s backlight by pressing the Light button.
Page 17: Status Symbols
General Radio Operation Status Symbols The top two rows in the display contain symbols indicating the radio’s status. Table 2: Status Symbols Symbol Indication Page Call Received. Blinks when an Individual Call is received. View Mode. View a list Received Signal Strength Indication (RSSI). The received signal strength for the current site.
Page 18: Light Emitting Diode (Led) Indicators
General Radio Operation Light Emitting Diode (LED) Indicators Table 3: LED Indicators This LED Color: indicates: RED (Illuminated) Transmitting RED (Blinking) • Channel Busy • Low Battery (lights while transmitting) GREEN (Blinking) Receiving Individual Call Alert Tones Your radio uses alert tones to inform you of radio conditions. Table 4: Alert Tones You hear: Tone Name...
Page 19 General Radio Operation Table 4: Alert Tones (Continued) You hear: Tone Name Heard: No ACK Received when the radio does not receive an acknowledgment. Time-Out Timer after time out. Timed Out Talk Prohibit/ when the PTT button is PTT Inhibit pressed, and transmissions are prevented.
Page 20 General Radio Operation Table 4: Alert Tones (Continued) You hear: Tone Name Heard: Volume Set when volume changed on a Long, quiet channel. Medium- Emergency Exit upon exiting the emergency Pitched Tone state. Failsoft when the trunking system fails. Automatic Call Back when the voice channel is available from the previous request.
Page 21 General Radio Operation Table 4: Alert Tones (Continued) You hear: Tone Name Heard: A Group of Scan Alert Off when the Scan feature is High Pitched deactivated through the Tones pre-programmed button or followed by a 3-Position Rotary Switch Group of Low Pitched Tones Ringing...
Page 22: Standard Accessories
Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and performance. For a list of Motorola approved batteries available for use with your XTS 2500 / XTS 2500 radio, see “Batteries” on page 48.
Page 23 General Radio Operation Attach the Battery With the radio off, fit the three extensions at the bottom of the battery into the bottom slots on the radio. Press both sides at the top of the battery against the radio until both latches click into place.
Page 24 General Radio Operation Smart Battery Condition Once this feature becomes available, it will let you view the condition of your Smart Battery. Press the Smart Battery CAPACITY button. INIT 10/01 EST CHGS Note: If a Smart Battery is not SMART BATT powering your radio: DATA NOT AVAILABLE...
Page 25: Antenna
General Radio Operation Antenna For information regarding other available antennas, see page 47. Attach the Antenna With the radio off, turn the antenna clockwise to attach Remove the Antenna With the radio off, turn the antenna counter-clockwise to remove it.
Page 26: Belt Clip
General Radio Operation Belt Clip Attach the Belt Clip Align the grooves of the belt clip with those of the battery. Press the belt clip downward until you clear a “click.” Remove the Belt Clip Use a flat-bladed screwdriver to press the belt clip tab away from the battery.
Page 27: Universal Connector Cover
General Radio Operation Universal Connector Cover The universal connector cover is located on the antenna side of the radio. It is used to connect certain accessories to the radio. Note: To prevent damage to the connector, shield it with the connector cover when not in use.
Page 28: Remote Speaker Microphone Adapter
Attach the Adapter With the Motorola side of the adapter facing out, snap the smaller end of the adapter into place in the shroud indent, below the On/Off Volume Control Knob.
Page 29: Radio On And Off
General Radio Operation Radio On and Off Turn the Radio On Turn the On/Off/Volume Control knob clockwise. • If the power-up test is successful, you will briefly SELF TEST see SELF TEST and then the home display. • If the power-up test is unsuccessful, you will see ERROR XX/YY ERROR XX/YY.
Page 30: Zones And Channels
General Radio Operation Zones and Channels A zone is a grouping of channels. A channel is a group of radio characteristics, such as transmit/receive frequency pairs. Before you use your radio to receive or send messages, you should select the zone. Select a Zone If a control on your radio has FIRE...
Page 31: Receive / Transmit
General Radio Operation Receive / Transmit Radio users who switch from analog to digital radios often assume that the lack of static on a digital channel is an indication that the radio is not working properly. This is not the case. Digital technology quiets the transmission by removing the “noise”...
Page 32: Use The Preprogrammed Volume Set Button
General Radio Operation Use the Preprogrammed Volume Set Button Turn the radio on and select the desired zone and channel. See Turn the Radio On, page 18 and Zones and Channels, page Press and hold the Volume Set button to hear the volume set tone.
Page 33: Use The Preprogrammed Monitor Button
General Radio Operation Use the Preprogrammed Monitor Button Turn the radio on and select the desired zone and channel. Press the Monitor button and listen for activity. (See the following Conventional Mode Operation.) Adjust the Volume Control knob if necessary. Press and hold the PTT button to transmit.
Page 34: Conventional Mode Operation
General Radio Operation Conventional Mode Operation Your radio may be programmed to receive Private-Line® (PL) calls. Momentarily press the Monitor button to listen for activity. Press and hold the Monitor button to set continuous monitor operation. (The duration of the button press is programmable.) Press the Monitor button again, or the PTT button, to...
Page 35: Common Radio Features
Common Radio Features Selectable Power Level This feature lets you select the power level at which your radio will transmit. The radio will always turn on to the preprogrammed default setting. This feature must be programmed by a qualified radio technician.
Page 36: Pl Defeat
Common Radio Features PL Defeat With this feature, you can override any coded squelch (DPL, PL, or network ID) that might be programmed to a channel. Place the preprogrammed PL Defeat switch in the PL Defeat position. You can now hear any activity on the channel.
Page 37: Emergency
Common Radio Features Emergency If the top (orange) button is programmed to send an emergency signal, then this signal overrides any other communication over the selected channel. Your radio can be programmed for the following: • Emergency Alarm • Emergency Alarm with Emergency Call •...
Page 38 Common Radio Features When you receive the ACK RECEIVED dispatcher’s • Four tones acknowledgment, you see • Alarm ends ACK RECEIVED, four tones sound, the alarm ends, and • Radio exits emergency the radio exits the emergency mode. If no acknowledgement is NO ACKNOWLDG received, you see NO ACKNOWLDG, the alarm ends,...
Page 39: Send A Silent Emergency Alarm
Common Radio Features Send a Silent Emergency Alarm With your radio turned on, • Display does not change press the Emergency • LED does not light button. The display does not • No tones change, the LED does not light, and you hear no tones. Note: To exit emergency at any time, press and hold the Emergency button for about a second.
Page 40 Common Radio Features Press and hold the PTT button and announce your emergency into the microphone. Release the PTT button to end the transmission and wait for a response from the dispatcher. Press and hold the Emergency button for about a second to exit emergency.
Page 41: Emergency Keep-Alive
Common Radio Features Emergency Keep-Alive With Emergency Keep-Alive enabled, if the radio is in the Emergency state, you cannot turn off the radio by using the On/Off Volume Control knob. With Keep-Alive, the radio will only exit the Emergency state using one of the ways mentioned in the previous sections (Emergency Alarm, Silent Emergency Alarm, or Emergency Call).
Page 42: Scan
Common Radio Features Scan The scan feature allows you to monitor traffic on different channels by scanning a preprogrammed list of channels. The list must be preprogrammed by a qualified technician. Turn Scan On and Off Place the Scan On/Off switch in the On or Off position.
Page 43: Delete A Nuisance Channel
Common Radio Features Delete a Nuisance Channel When the radio scans to a channel that you do not wish to hear (nuisance channel), you can temporarily delete the channel from the scan list. When the radio is locked onto the channel to be deleted, press the preprogrammed Nuisance Delete button.
Page 44 Common Radio Features effect until scan is turned off, then scanning reverts back to the preprogrammed state. When the radio is locked onto the channel to be designated as priority-two, press the preprogrammed Dynamic Priority button. Note: The priority-one channel cannot be changed to priority-two.
Page 45: Telephone Calls (Trunking Only)
Common Radio Features Telephone Calls (Trunking Only) Use your radio to receive standard phone calls. A landline phone can be used to call a radio. Answer a Phone Call When a phone call is received, you hear a telephone-type ringing, the PHONE CALL LED blinks GREEN, the •...
Page 46: Private Calls (Trunking Only)
Common Radio Features Private Calls (Trunking Only) These one-to-one calls between two radios are not heard by others in the current talkgroup. The calling radio automatically verifies that the receiving radio is active on the system and that it can display the caller’s ID.
Page 47: Call Alert Paging
Common Radio Features Call Alert Paging Call Alert allows your radio to work like a pager. Answer a Call Alert Page When a Call Alert Page is received, you hear four repeating alert tones, the PAGE RECEIVD LED blinks GREEN, the •...
Page 48: Repeater Or Direct Operation
Common Radio Features Repeater or Direct Operation Also known as TALKAROUND operation, DIRECT lets you bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the same. REPEATER operation increases the radio’s range by connecting with other radios through a repeater.
Page 49: Special Radio Features
Special Radio Features PTT ID Receive This feature allows you to see the radio ID number of the radio you are currently receiving. This ID can be a maximum of eight characters and can be viewed by both the receiving radio and the dispatcher. Transmit Your radio’s ID number is automatically sent every time the PTT button is pressed.
Page 50: Out-Of-Range
Special Radio Features Out-of-Range If you go out of the range of the system, and can no longer lock onto a control channel: The display shows OUT OF Your radio’s ID OUT OF RANGE RANGE and the currently selected zone/channel combination, and/ AND/OR or you hear a low-pitched tone.
Page 51: Site View And Change
Special Radio Features Site View and Change View the Current Site Momentarily press the preprogrammed Site Search button. The display shows either the number of the current site SITE 2 and its corresponding Received Signal Strength Indicator (RSSI) symbol ). (See Table 2 on page 6.
Page 52: Helpful Tips
Helpful Tips Radio Care Cleaning To clean the external surfaces of your radio: Combine one teaspoon of mild dishwashing detergent to one gallon of water (0.5% solution). Apply the solution sparingly with a stiff, non-metallic, short- bristled brush, making sure excess detergent does not get entrapped near the connectors, controls or crevices.
Page 53: Service
Helpful Tips Service Proper repair and maintenance procedures will assure efficient operation and long life for this product. A Motorola maintenance agreement will provide expert service to keep this and all other communication equipment in perfect operating condition. A nationwide service organization is provided by Motorola to support maintenance services.
Page 54 Charging a hot battery (above 95°F [35°C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above.
Page 55: Battery Recycling And Disposal
Motorola fully endorses and encourages the recycling of NiCd batteries. In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling Corporation (RBRC) program for NiCd battery collection and recycling. Many retailers and dealers participate in this program.
Page 56: Antenna
Helpful Tips Antenna Radio Operating Frequencies Before installing the antenna, make sure it matches your radio’s operating frequency. Antennas are frequency sensitive and are color coded according to their frequency range. The color code indicator is located in the center of the antenna’s base.
Page 57 Helpful Tips Approx. Insulator Frequency Antenna Length Antenna Type Color Range Kit No. Code (MHz) 800/900 MHz WHITE 806–941 NAF5042 stubby, quarterwave 700/800 MHz whip 178 GREEN 764–870 NAF5080 ASTRO XTS 2500 / XTS 2500I Model 1.5...
Page 58 Helpful Tips Notes...
Page 59: Accessories
Accessories Motorola provides the following approved accessories to improve the productivity of your XTS 2500 / XTS 2500 portable two-way radio. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/governmentandenterprise...
Page 60: Batteries
* Batteries include an over-discharge protection circuit (similar to those in Li- Ion batteries) to extend life of batteries by preventing excessive battery dis- charge during customer use. Motorola strongly recommends charging these batteries with Motorola-approved IMPRES desktop charges programmed with version 3.4 of the IMPRES desktop charger software...
Page 61: Chargers
Accessories Chargers NLN7967 Wall-mount kit for multi-unit charger NLN7968 Rack-mount kit for multi-unit charger NTN1168 Single-unit dual rate, rapid charger 120V NTN1169 Single-unit dual rate, rapid charger 220V (2-prong Euro plug) NTN1170 Single-unit dual rate, rapid charger 240V (3-prong UK plug) NTN1177 Multi-unit, dual rate, rapid charger 110V...
Page 62: Microphones, Remote Speaker
Accessories Microphones, Remote Speaker NMN6191 Remote speaker mic, noise-canceling (includes 6.0-ft. coiled cord assembly, 3.5-mm earjack, swivel clip, quick disconnect) NMN6193 Remote speaker mic NNTN4285 Remote speaker mic adapter ZMN6031 Speaker mic, 3-piece ZMN6032 Speaker mic, 2-piece ZMN6038 Speaker mic, 2-piece, extra loud ZMN6039 Speaker mic, 3-piece, extra loud *RMN5074...
Page 63: Surveillance Accessories
Accessories Surveillance Accessories Adapters and Adapter Cable BDN6673 Headset adapter cable (for use with BDN6635 and BDN6645) BDN6676 Jedi adapter NTN8613 Surveillance accessory adapter ® CommPort Integrated Microphone/Receivers NTN1624 CommPort with palm PTT NTN1625 CommPort ear mic with PTT for noise levels up to 100 dB (requires BDN6676 adapter) NTN1663 CommPort ear mic with ring PTT for noise levels up...
Page 64 Accessories BDN6670 Earpiece, mic and PTT separate with extra-loud ear- phone (exceeds OSHA limits), beige BDN6677 Ear mic, standard, noise up to 95 dB (must order BDN6671 interface module), black BDN6678 Ear mic, standard, noise up to 95 dB (must order BDN6671 interface module), beige BDN6719 Earpad, with 3.5mm threaded plug...
Page 65: Headsets And Headset Accessories
Accessories Headsets and Headset Accessories BDN6635 Heavy-duty VOX headset with noise-canceling boom mic (requires BDN6673 adapter) BDN6636 Heavy-duty VOX headset with throat mic (requires BDN6673) BDN6645 Noise-canceling boom mic headset with PTT on ear- NMN1020 Safety helmet headset (requires BDN6676 adapter) NMN6245 Light-weight headset NMN6246...
Page 66 Accessories Notes...
Page 67: Appendix: Maritime Radio Use In The Vhf Frequency Range
Appendix: Maritime Radio Use in the VHF Frequency Range Special Channel Assignments Emergency Channel If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order: “MAYDAY, MAYDAY, MAYDAY.”...
Page 68: Non-Commercial Call Channel
Appendix: Maritime Radio Use in the VHF Frequency Range Non-Commercial Call Channel For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9. Operating Frequency Requirements A radio designated for shipboard use must comply with Federal Communications Commission Rule Part 80 as follows: •...
Page 69 Appendix: Maritime Radio Use in the VHF Frequency Range Table A-1: VHF Marine Channel List (Continued) Frequency (MHz) Channel Number Transmit Receive 156.400 – 156.450 156.450 156.500 156.500 156.550 156.550 156.600 156.600 13** 156.650 156.650 156.700 156.700 15** 156.750 156.750 156.800 156.800 17**...
Page 70 Appendix: Maritime Radio Use in the VHF Frequency Range Table A-1: VHF Marine Channel List (Continued) Frequency (MHz) Channel Number Transmit Receive 67** 156.375 156.375 156.425 156.425 156.475 156.475 156.575 156.575 156.625 – 156.675 156.675 156.725 156.725 77** 156.875 – 156.925 161.525 156.975...
Page 71: Glossary
A channel that has traffic on it. Analog Signal An RF signal that has a continuous nature rather than a pulsed or discrete nature. ASTRO 25 Trunking Motorola standard for wireless digital trunked communications. ASTRO Motorola standard for wireless analog or Conventional digital conventional communications.
Page 72 Glossary Cursor A visual tracking marker (a blinking line) that indicates a location on the display. Digital Private Line A type of coded squelch using data bursts. (DPL) Similar to PL except a digital code is used instead of a tone. Digital Signal An RF signal that has a pulsed, or discrete nature, rather than a continuous nature.
Page 73 Glossary Network Access Network Access Code (NAC) operates on Code digital channels to reduce voice channel interference between adjacent systems and sites. NiCd Nickel Cadmium. NiMH Nickel Metal Hydride. Non-tactical/Revert The user will talk on a preprogrammed emergency channel. The emergency alarm is sent on this same channel.
Page 74 Glossary Repeater A conventional radio feature, where you talk through a receive/transmit facility (repeater), that re-transmits received signals in order to improve communications range and coverage. Selective Switch Any digital P25 traffic having the correct Network Access Code and the correct talkgroup.
Page 75 Glossary Notes ASTRO XTS 2500 / XTS 2500I Model 1.5...
Page 76: Commercial Warranty
Product Accessories One (1) Year Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.
Page 77 Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company ASTRO XTS 2500 / XTS 2500I Model 1.5...
Page 78 Commercial Warranty which sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola at 1-888-567-7347 US/Canada. V. WHAT THIS WARRANTY DOES NOT COVER: A) Defects or damage resulting from use of the Product in other than its normal and customary manner.
Page 79 A) that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim; B) that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and C) should the Product or parts become, or in MOTOROLA’s...
Page 80 Commercial Warranty MOTOROLA which is attached to or used in connection with the Product. The foregoing states the entire liability of MOTOROLA with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for...
Page 81: Index
Index channel select a channel ...... 18 accessories chargers ........49 antennas .........47 enhanced and multi-unit line cords batteries ........48 belt clips ........48 conventional fuel gauge symbol . 42 body-worn .......48 conventional mode operation ..22 carry accessories ....48 chargers ........49 Commport integrated microphone/ receivers ........51 display ..........
Page 82 Index smart fuel gauge symbol ..... 42 surveillance accessories ..... 51 physical features of the radio ..3 Commport integrated microphone/ PL defeat ........24 receivers ........ 51 programmable features ....4 earpieces ........ 51 PTT ID .........37 headsets and headset accessories ..........53 radio interface modules for ear radio care microphones ......
Page 83 Motorola, Inc. 1301 E.Algonquin Rd. Schaumburg, IL60196-1078, USA. MOTOROLA, the Stylized M Logo, ASTRO, and SmartZone are registered in the U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2007 .

This manual is also suitable for:

Astro xts 2500i 1.5

Motorola ASTRO XTS 2500 1.5 Quick Reference Card

Quick Links

Need help?

Questions and answers

Related Manuals for Motorola ASTRO XTS 2500 1.5

Summary of Contents for Motorola ASTRO XTS 2500 1.5

This manual is also suitable for:

Table of Contents