Home Accents Holiday 21GR00238 Instruction Manual

IMPORTANT: Please read this instruction carefully before assembly and save these instruction for future use.
CAUTION:
1) Read all instructions and warning tags carefully.
2) For indoor use only.
3) Do not place near gas or electric heaters, radiators, fireplaces, candles or other similar sources of heat.
4) Place on a hard, flat, level surface. Do not place where the tree is likely to tip or wobble due to uneven flooring or thick
carpeting. Do not install near fountains, bathtubs, sinks or other wet areas.
5) Do not use candles on the tree.
6) After assembling and decorating the tree, ensure that it is stable. If the tree is unstable, attach support wires to walls
and/or window frames (ensure that support wires are also secure).
7) Do not overload extension cords or power bars; see ratings on these devices and check the rating labels on the tree
for compatibility.
8) Do not place in uncovered area where there is prolonged exposure to sunlight or where rain/snow accumulates in the
pot or on the tree.
9) This is a Christmas decoration. This is not a toy. Keep out of the hands of small children.
10) For festive use only, not intended for consecutive use over 90 days each season.
11) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
12) Children should be supervised to ensure that they do not play with the appliance.
13) The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.
14) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
ASSEMBLY:
1) Before you start to assemble your tree, choose a location near a wall
outlet. Assemble the tree stand and place on a level surface.
2) Set up the tree stand by spreading the legs into an "X" shape. Lock the
tree stand in position by threading screws into the 3 holes. Only screw
the bolts in until they go slightly past the inner metal ring. Do not screw
the bolts in all the way.
3) Carefully insert the bottom tree section (C) of the tree into the stand.
Make sure the pole is firmly inserted into the stand. Tighten the three
screws on the tree stand so that the tree stands straight.
4) Insert the middle section (B) of the tree into the bottom section (C).
Connect the male light-string end connector in section (B) to the female
light-string end connector in section (C).
5) Insert the tree top section (A) into section (B). Connect the male light-
string end connector in section (A) to the female light-string end
connector in section (B).
6) Allow branches to fall into place. When adjusting branches make sure
that all wires are free of branch hinges.
7) Connect the plug(s) securely as shown above. Plug the adapter into
the wall outlet.
8) Shape the branches by working from the bottom of the tree upwards.
Fan out the tips in a pattern of one to the right, one to the left, and one
to the centre of the main stem. Tips at the centre position should be
alternately placed so that they do not line up one after the other.
Repeat pattern for each branch.
9) After shaping the whole tree, step back and take an overall look and
shift branches to fill any gap. Your tree is now ready for decorating.
Instruction Manual
SAVE THESE INSTRUCTIONS
Pg. 1
Sku# XXXXXXXXXX
Model: 21GR00238