Sealey IREX 1 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to DO NOT cover Hot surfaces
instruction
manual
1. SAFETY
Read instructions carefully prior to installation
9
MUST only be used in conjunction with Sealey IR13, IR16 and IR19 Infrared diesel heaters.
9
Ensure cuts that are made into any structural walls are carried out by a qualified person.
9
Heater MUST be at least 500mm from the wall.
9
Please remove casters when installing the exhaust flues so that the machine cannot move freely.
9
Sections IREX1, IREX2 and IREX3 require no fixings for installation.
9
DO NOT place any objects within 2m of the heater.
8
2. INSTALLATION
.
3. IREX4
re
Covers exhaust, preventing water ingress and damage. Can be quickly installed or
removed when required. Manufactured out of 301 stainless steel. Fits to IREX1 and is
compatible with main units IR13/IR16/IR19.
IREX4
Screw
IREX1
© Jack Sealey Limited
IREX STAINLESS STEEL EXHAUST FOR IR13/16/19 Ø100MM:
IREX1: FLUE END PIPE
IREX2:FLUE EXTENSION
IREX3: FLUE 90° BEND
Original Language Version
IREX4: STAINLESS STEEL FLUE RAIN CAP
IREX5: STAINLESS STEEL EXHAUST MUFFLER
IREX1
IREX2
IREX 1,2,3,4,5 Issue:1 30/04/25
IREX3