Summary of Contents for Sauder Cottage Road 418072
Page 1
Cottage Road Collection | Model 418072 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Prefer the phone? Call 1-800-523-3987.
Page 2
LEFT DRAWER SIDE (2) RIGHT FRONT LEG (2) BOTTOM SIDE MOLDING (4) D151 DRAWER BACK (2) LEFT FRONT LEG (2) END MOLDING (2) D953 DRAWER BOTTOM (2) RIGHT REAR LEG (1) TOP (1) LEFT REAR LEG (1) Page 2 418072 www.sauder.com/services...
30S BLACK 1-9/16" FLAT HEAD SCREW - 8 BLACK 9/16" FLAT HEAD SCREW - 4 SILVER 1/2" MACHINE SCREW - 2 BLACK 2" PAN HEAD SCREW - 4 HIDDEN WIRELESS Qi COMPATIBLE CHARGER by EGGTRONIC - Item 425905 (sold separately) Page 4 418072 www.sauder.com/services...
Page 5
Look for this icon. It means a Step 1 video assembly tip is available at www.sauder.com/services/tips Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push twenty-eight HIDDEN CAMS (1F) into the ENDS (A å...
Page 6
UPRIGHTS (C and D), BACKS (H2 and I), and MOLDINGS (S and T). Arrow Arrow (44 used) Arrow Hole The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. Page 6 418072 www.sauder.com/services...
Page 7
Step 3 Turn forty-four CAM SCREWS (8F) into å the LEGS (K, L, M, N, O, and P). (44 used) www.sauder.com/services 418072 Page 7...
Page 8
NOTE: The MOLDINGS should be centered on the ENDS. å Apply pressure with your hands as you guide the MOLDINGS over the SCREWS and onto the ENDS. Shoulder Surface with grooves BLACK 9/16" FLAT HEAD SCREW (4 used in this step) Page 8 418072 www.sauder.com/services...
Page 9
H I D i t h D E N i t h f a c S u r D E N H I D These holes These holes must be here. must be here. www.sauder.com/services 418072 Page 9...
Page 10
H I D i t h D E N i t h f a c S u r D E N H I D These holes These holes must be here. must be here. Page 10 418072 www.sauder.com/services...
Page 11
Push the black lever in and pull the SLIDE from the RAIL. Open end GOLD 5/16" FLAT HEAD SCREW (8 used in this step) RIGHT END ASSEMBLY Open end LEFT END ASSEMBLY Open end Open end www.sauder.com/services 418072 Page 11...
Tighten Risk of damage or Arrow injury. HIDDEN CAMS must be completely Arrow Maximum tightened. HIDDEN 210 degrees CAMS that are not completely tightened may loosen, and parts may separate. To Minimum completely tighten: 190 degrees Page 12 418072 www.sauder.com/services...
Page 13
NOTE: You should start each SCREW a few turns before å 190 degrees completely tightening any of them. Unfi nished edge BLACK 2" PAN HEAD SCREW (4 used in this step) For support, place packing foam and magazines here. www.sauder.com/services 418072 Page 13...
Page 14
For support, place packing foam and magazines here. S u r f a c H I D D E N i t h Finished edge For support, place packing foam and magazines here. Page 14 418072 www.sauder.com/services...
Page 15
Fasten the RIGHT END ASSEMBLY to the SMALL å Minimum BACK (I) and BOTTOM ASSEMBLY on the right end 190 degrees of your unit. Tighten six HIDDEN CAMS. LEFT END ASSEMBLY RIGHT END ASSEMBLY BOTTOM ASSEMBLY BOTTOM ASSEMBLY www.sauder.com/services 418072 Page 15...
Page 16
BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL BRACKETS on the MOLDING (R) and into the holes in the TOP (E3). BLACK 9/16" LARGE HEAD SCREW (6 used in this step) These holes must be here. Page 16 418072 www.sauder.com/services...
Page 17
The embedded wireless charging system is designed for the following smartphones: • Apple (iPhone 8 or newer) • Samsung (Galaxy 6 or newer) For a complete compatibility list, go to sauder.com. If you did not purchase the optional Hidden Wireless Qi Compatible Charger by å...
Page 18
"Changes or modifi cations not expressly approved by the party responsible for compliance could void the user's authority to operate this device". "Changes or modifi cations not expressly approved by Sauder Woodworking Co. could void the user's authority to operate this device".
Page 19
The STICKER will be centered in this cut-out circle. L'AUTOCOLLANT sera centré dans ce cercle découpé. La ETIQUETA se centrará en este círculo recortado. LONG FRONT EDGE OF TOP LONG CHANT AVANT DU DESSUS BORDE LARGO DELANTERO DEL PANEL SUPERIOR www.sauder.com/services 418072 Page 19...
Page 20
This page was intentionally left blank. Cette page a été intentionnellement laissée vierge. Esta página fue dejada en blanco intencionalmente. Page 20 418072 www.sauder.com/services...
Page 21
The STICKER will be centered in this cut-out circle. L'AUTOCOLLANT sera centré dans ce cercle découpé. La ETIQUETA se centrará en este círculo recortado. LONG FRONT EDGE OF TOP LONG CHANT AVANT DU DESSUS BORDE LARGO DELANTERO DEL PANEL SUPERIOR www.sauder.com/services 418072 Page 21...
Page 22
This page was intentionally left blank. Cette page a été intentionnellement laissée vierge. Esta página fue dejada en blanco intencionalmente. Page 22 418072 www.sauder.com/services...
Page 23
STICKER over the cut-out hole and stick it to the TOP. STOP Center the STICKER inside the cut-out hole in the template. The STICKER must be placed directly above the CHARGER. Center the STICKER inside the cut-out hole in the template. www.sauder.com/services 418072 Page 23...
Page 24
Fasten the DRAWER BACK (D151) to the DRAWER å å grooves in the DRAWER SIDES (D48 and D49) SIDES (D48 and D49). Use four BLACK 1-9/16" FLAT HEAD and DRAWER FRONT (Q). SCREWS (30S). Repeat this step for the other drawer. Page 24 418072 www.sauder.com/services...
Page 25
Repeat this step for the other drawer. å Open end SILVER 1/2" MACHINE SCREW (2 used for the KNOB SETS) Open end 100K (4 screws per drawer) GOLD 5/16" FLAT HEAD SCREW (8 used in this step) www.sauder.com/services 418072 Page 25...
Page 26
Slide another FILE GLIDE (4B) onto the other end of the å FILE RODS (7B), then press this FILE GLIDE over the LEFT DRAWER SIDE (D49). Insert the FILE RODS into the holes of your choice in the FILE GLIDES, depending on your fi le sizes. Page 26 418072 www.sauder.com/services...
Page 27
A sticker will be on the left or right if you installed the optional Hidden Wireless Qi Compatibility Charger by Eggtronic (purchased separately). 25 lbs. 70 lbs. 30 lbs. 25 lbs. (4 used) 30 lbs. To cover HIDDEN CAMS www.sauder.com/services 418072 Page 27...
(IF ANY SOUND, THEN SECTION A IS NOT THE ISSUE) (IF NO SOUND, THEN ISSUE IS IN SECTIONS A OR B) (normal conditions: one single beep when charging starts) 17) Is the smartphone correctly aligned with the charging spot? (normal conditions: yes) Page 28 418072 www.sauder.com/services...
EXTRÉMITÉ DROITE ..........1 (ENSEMBLE DE GLISSIÈRE ILLUSTRÉ À PART) pour future référence. EXTRÉMITÉ GAUCHE ..........1 35MA GLISSIÈRE D'EXTENSION ........4 Pour contacter Sauder en ce qui concerne cet MONTANT DROIT ............1 35MC COULISSE D'EXTENSION ........4 élément, faire référence MONTANT GAUCHE ..........1 TIGE DE DOSSIER ............2...
Page 30
INTERMÉDIAIRE (O et P). Utiliser quatre VIS TÊTE GOUTTE DE SUIF 51 mm NOIRES (66S). REMARQUE : Il est préférable de donner quelques tours de tournevis à chaque VIS avant de les serrer toutes à bloc. Page 30 418072 www.sauder.com/services...
Page 31
Découper le GABARIT D'AUTOCOLLANT si ce n'a pas été déjà fait. charge. Chargez votre téléphone en le posant simplement sur votre meuble. Pour l'acheter, allez sur le site Web sauder.com Tout d'abord, utiliser du ruban adhésif pour fi xer les chants du gabarit d'autocollant sur les coins du DESSUS (E3) comme Liste de smartphones approuvés compatibles Qi...
REMARQUE : Prière de lire les informations importantes sur la de charge ? sécurité fi gurant sur les pages arrière du manuel d’instructions. (conditions normales : oui) Ceci complète l'assemblage. Nettoyer avec un tissu humide. Essuyer. Page 32 418072 www.sauder.com/services...
Si 35MC CORREDERA DE EXTENSIÓN ......4 necesita ponerse en PARAL DERECHO ............1 VARILLA DE ARCHIVERO ........2 contacto con Sauder en PARAL IZQUIERDO .............1 cuanto a esta unidad, CORRIMIENTO DE ARCHIVERO.....2 D48 LADO DERECHO DE CAJÓN ......2 refi érase al número EXCÉNTRICO ESCONDIDO ......72...
Page 34
INFERIOR LATERAL (T). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. PARAL IZQUIERDO (D). Apriete seis EXCÉNTRICOS ESCONDIDOS. Fije el otro conjunto del FONDO a las PATAS (K y P) y a la MOLDURA INFERIOR LATERAL (T). Apriete cuatro EXCÉNTRICOS ESCONDIDOS. Page 34 418072 www.sauder.com/services...
Page 35
Cargue su teléfono simplemente colocándolo en la parte superior IMPORTANTE: La ETIQUETA DE PUNTO DE CARGA de sus muebles. Para comprar, vaya al sauder.com. INALÁMBRICA debe colocarse directamente encima Lista de Teléfonos Inteligentes Aprobados Compatibles con Qi del CARGADOR.
Page 36
(SI NO HAY SONIDO, ENTONCES EL PROBLEMA ESTÁ EN LAS SECCIONES A O B) (condiciones normales: un solo pitido cuando se inicia la carga) 17) ¿El teléfono inteligente está alineado correctamente con el punto de carga? (condiciones normales: sí) Page 36 418072 www.sauder.com/services...
Page 37
à Les téléviseurs peuvent être particulièrement un téléviseur. cet eff et. lourds. De plus, le poids et l’emplacement du tube image ont tendance à rendre les téléviseurs instables et enclins à tomber vers l’ a vant. www.sauder.com/services 418072 Page 37...
Page 38
Además, el peso y la ubicación del tubo de imagen tienden a causar la inestabilidad de televisores y propensa a volcarse hacia adelante. Page 38 418072 www.sauder.com/services...
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Page 40
Dear Valued Customer: So, how did it go? Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built. If you Nice.
Need help?
Do you have a question about the Cottage Road 418072 and is the answer not in the manual?
Questions and answers