Advertisement
Quick Links
LANAI WOVEN DINING CHAIR
HDC#:1929610828
MFG#:FRA70373S-ST
Please read over this instruction manual as it will save time in the
assembly of this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft
flat surface to avoid any damages to the product's finish.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Home Decorators Collection FRA70373S-ST
Summary of Contents for Home Decorators Collection FRA70373S-ST
- Page 1 LANAI WOVEN DINING CHAIR HDC#:1929610828 MFG#:FRA70373S-ST Please read over this instruction manual as it will save time in the assembly of this product. Note: Prior to assembly, please open and lay parts out on a clean, soft flat surface to avoid any damages to the product’s finish.
- Page 2 Caution: The Lanai Dining Chair was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is not intended for Inclement /Severe weather in any form including, but not limited to: rain, hail, sleet, snow and/or wind. The Manufacturer recommends that with formidable weather approaching you store and/or cover this dining chair.
- Page 3 DO NOT RETURN TO RETAILER IF YOU HAVE ANY QUESTIONS OR CONCERNS PLEASE VISIT OUR WEBSITE AT: www.yotrioint.com OR TOLL FREE AT: 1-800-245-2217 MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30 AM TO 8:00PM EASTERN STANDARD TIME Warranty Coverage Requirements: 1.
- Page 4 Parts Check List Please remove all parts carefully from box and lay out on clean, soft surface to protect product’s finish. ① ② Leg Connector – 6PCs Chair Frame – 6PCs ③ ④ Seat Cushion – 6PCs Pillow – 6PCs...
- Page 5 A. M6X15 Bolt – 24PCS B. M6 Washer - 24PCS C. Hex Wrench - 1PC...
- Page 6 Lay the chair frame (1) upside down on a soft surface. Attach the leg connector (2) to the leg of chair frame (1) using M6x15 bolt (A) and M6 washer (B). Use the hex wrench (C) to loosely tighten all the bolts. Repeat this step for the other chair legs.
- Page 7 Turn the chair right side up and fully tighten all the bolts with the hex wrench (C). Check to ensure the chair is tightly assembled and stable before use. Place the seat cushion (3) and pillow (4) on the chair. Repeat steps 1 and 2 for other five chairs .
Need help?
Do you have a question about the FRA70373S-ST and is the answer not in the manual?
Questions and answers