Sony NWS203FB Operation Manual page 70

0
0
Troubleshooting
Operation
(continued)
Symptom
Noise is generated.
Buttons do not work.
The player does not work.  The remaining battery is insufficient.
The transferred songs
cannot be found.
The volume is not loud
enough.
There is no sound from
right channel of the
headphones.
Playback has stopped
suddenly.
Cause/Remedy
 An apparatus emitting radio signals, such as a
mobile phone is being used near the player.
 When using such apparatus as mobile phones,
keep them away from the player.
 The shuttle switch is set to the HOLD position.
 Slide the shuttle switch to the Normal (centre)
position (  page 10).
 The player contains moisture condensation.
 Wait a few hours to let the player dry.
 The remaining battery is low or insufficient.
 Charge the battery connecting to the computer
(  page 62).
 Even if charging the battery and nothing is
changed, press the DISP/HOME button and
 button at the same time for more about 7
seconds to reset the player (  page 69).
 Charge the battery connecting to the computer
(  page 62).
 Even if charging the battery and nothing is
changed, press the DISP/HOME button and
 button at the same time for more about 7
seconds to reset the player (  page 69).
 The built-in flash memory of the player was
formatted using Windows Explorer.
 Format the built-in flash memory using the
"Format" menu of the player (  page 50).
 The supplied USB cable is disconnected from the
player while data is being transferred.
 Transfer usable files back to your computer and
format the built-in flash memory using the
"Format" menu of the player (  page 50).
 AVLS is enabled.
 Disable AVLS (  page 36).
 The headphone jack is not fully inserted.
 If the headphones are not connected correctly,
sound will not be output properly. Connect the
headphones into the jack until it clicks (  page 11).
 The remaining battery is insufficient.
 Charge the battery connecting to the computer
(  page 62).
Continued 