Settings
Changing the USB Connection Setting
Depending on how you are using the computer, if the power supply (USB Bus
Powered) is insufficient, incomplete data transfer may occur from the
computer to the player. In this case, setting the USB connection (USB Power)
to "100mA" may improve data transfer. "500mA" is set by default.
Note
You cannot set this during the USB connection.
Press and hold the DISP/HOME button until the HOME screen
appears.
Rotate the shuttle switch to select
button to confirm.
Rotate the shuttle switch to select "Advanced Menu>" and press the
button to confirm.
Rotate the shuttle switch to select "USB Power>" and press the
button to confirm.
Rotate the shuttle switch to select "100mA" or "500mA" and press
the button to confirm.
To return to the previous menu
Press the DISP/HOME button.
Hints
When you connect the player to a laptop computer, we recommend to connect the
laptop computer to a power supply.
The charging time will be longer if the "USB Power" is set to "100mA. "
button
DISP/HOME button
(USB Power)
to
Shuttle switch
to
(SETTINGS) and press the